2-3/8" Wide x 28" High Square Rockwell Table Leg Set, Stainless Steel, 4/Set
Description
2-3/8 Wide 28 High Rockwell Table Leg Set
2-3/8 wide 28 high Rockwell table leg set from Peter Meier, Inc. provides a matched set of structural supports for table, counter and bar height work surfaces, so installers can keep a consistent look across multiple heights on the same project. The legs are stainless steel, which resists corrosion in normal interior environments and keeps the finish looking uniform around busy work areas. Each leg is 28 inches high, giving a straightforward starting height for standard table and work-surface builds where precise finished elevation is important. The Rockwell series identity and manufacturer part 860-28-SS help match this set to project documentation or previous jobs that already specify this exact leg.
Stainless Rockwell Legs With Job-Ready Details
- The stainless steel construction provides a solid, corrosion-resistant leg body, which supports long-term appearance and performance in workshop, office, or residential table applications where metal is exposed to daily use.
- The 2-3/8 inch (2.36 inch) square profile creates a stable footprint at each corner, helping distribute loads evenly into the floor and giving tables a clean, uniform visual line along the edges.
- The 1 1/8 inch adjustable foot built into each leg allows small height changes from the base of the leg, which helps level a work surface when flooring varies slightly from one corner to another.
- The 4 9/16 inch (116 mm) square mounting plate at the top of each leg gives a broad fastening surface, which helps spread stress into the underside of the top and improves rigidity against racking forces.
- The Rockwell table, counter and bar height offering means this 28 inch version aligns with related heights in the same line, which simplifies layout when different surface elevations must share a consistent design language.
Mounting And Height Adjustment For These Legs
The 4 9/16 inch square mounting plate gives an installer a clear footprint for fastening each leg to the underside of a work surface, which helps position legs accurately at corners or support points. The square plate layout also simplifies aligning edges parallel to the table sides, maintaining straight lines in finished installations. The 1 1/8 inch adjustable foot lets the installer fine-tune height from the floor side after the top is fixed, which reduces rework when floors are uneven. Using the 28 inch leg height as the base dimension, the adjustable foot range provides enough travel to match common table levels while still keeping each leg firmly seated.
Using Rockwell Table Legs In Real Projects
Where Rockwell 28 Inch Legs Work Best
The Rockwell 28 inch stainless table leg set is specified for table, counter and bar height applications, so it fits into projects where multiple surface elevations share the same square leg profile. The stainless steel body suits interior woodworking environments where metal components live beside laminates, wood tops, and commercial surfaces, keeping a neutral finish that coordinates with many materials. The 2-3/8 inch square dimension offers a visual scale that works for work surfaces, meeting tables, or shop tables, matching the proportions many designers expect in square metal legs. With the 4 9/16 inch square mounting plate tying into the underside of the top, these legs help support tops in offices, hospitality spaces, or workshops where lateral forces and daily movement demand a firm connection.
Details That Support Repeatable Table Installs
The fixed 28 inch leg height, combined with the 1 1/8 inch adjustable foot, creates a predictable measurement chain from floor to underside of top, which speeds layout when multiple tables in a room must sit at the same working level. The square 2-3/8 inch profile and 4 9/16 inch mounting plate make it straightforward to transfer centerlines and edge setbacks from drawings directly onto tops, supporting repeatable drilling or fastening patterns across production runs. Because the product is defined by the manufacturer part number 860-28-SS, shops can reorder the same Rockwell 28 inch stainless legs and preserve exactly the same dimensions and adjustment behavior on replacement tops or future phases. Using a consistent stainless Rockwell leg across table, counter and bar height installations keeps hardware geometry familiar, which can reduce layout time and help installers move efficiently between different elevations on the same job.
Common Questions About Rockwell 28 Inch Legs
What is the exact height of each Rockwell table leg?
Each Rockwell table leg in this set is 28 inches high, which establishes a standard base height for table or work-surface builds before factoring in top thickness and the adjustable foot range.
How wide are the stainless Rockwell table legs?
The Rockwell legs are 2-3/8 inches, or 2.36 inches, square, giving each leg a consistent footprint that supports stable corners and helps distribute loads into the floor area beneath each support.
What adjustment does the Rockwell leg foot provide?
The Rockwell table leg set has a 1 1/8 inch adjustable foot at the bottom of each leg, allowing fine-tuning of finished height to compensate for slight floor irregularities during installation.
How does the mounting plate support the table top?
The 4 9/16 inch, or 116 mm, square mounting plate spreads load across a wider area on the underside of the top, helping resist racking and keeping the table feeling solid under side loads.
What material are the Rockwell 28 inch legs made from?
The Rockwell 28 inch table legs are stainless steel, which provides corrosion resistance and a consistent metal finish suitable for interior work surfaces and frequently used table environments.
How does the 860-28-SS part number help on jobs?
The manufacturer part number 860-28-SS uniquely identifies this Rockwell 28 inch stainless leg set, so future projects can match dimensions and appearance by specifying the same part.
Selecting This Rockwell Leg Set For Projects
This Rockwell 2-3/8 wide 28 high table leg set from Peter Meier, Inc. combines stainless steel construction, a 4 9/16 inch square mounting plate, and a 1 1/8 inch adjustable foot, giving installers a defined, repeatable solution for table, counter and bar height work surfaces. Using the specific 860-28-SS part number ties current work to future phases, keeping leg dimensions, adjustment behavior, and appearance consistent across projects.