2-3/8" Wide x 34-1/2" High Square Rockwell Table Leg Set, Brushed Steel, 4/Set

Rockwell Table Leg Set For Stable Work Surfaces

Rockwell table leg set from Peter Meier, Inc. provides a matched group of table legs designed for work surface and table projects where consistent height and style matter. The legs are 34-1/2 inches high, which suits applications needing that specific vertical dimension on a work surface or table frame. Each leg is 2-3/8 inches wide with a square profile, so the support footprint is clearly defined when laying out corners and structural points. The legs are finished in brushed steel, giving a metallic surface that pairs with modern work surfaces and coordinates with other brushed hardware in a project. An adjustable foot with 1 1/8 inch of travel is built into each leg, which allows on-site height adjustment within that range to deal with floor variations or fine tune working height. A 4 9/16 inch (116mm) square mounting plate at the top defines the interface to the work surface.

Key Rockwell Leg Details That Drive Results

• The 34-1/2 inch overall height sets a defined starting point for building work surface and table projects that call for that specific leg length, which helps standardize layout and leveling across multiple units.
• The 2-3/8 inch wide square leg profile provides a consistent, straight-sided support that is easy to align with edges and corners during layout, which simplifies measuring and marking work.
• The brushed steel finish creates a uniform metallic appearance that coordinates with other brushed components, helping projects maintain a coherent visual line when exposed legs are part of the design.
• The integrated 1 1/8 inch adjustable foot gives a controlled amount of height flexibility at the floor, which helps compensate for uneven surfaces and allows small height tuning without cutting or reworking legs.
• The 4 9/16 inch (116mm) square mounting plate at the top presents a defined bearing area for contact with the work surface structure, supporting predictable load transfer where the leg meets the tabletop.

Mounting And Height Details For Rockwell Legs

This Rockwell table leg set uses a 4 9/16 inch (116mm) square mounting plate at the top, so the contact area between the leg and the work surface is clearly defined during layout and drilling. The 34-1/2 inch leg height works with that mounting interface to give a consistent starting dimension from floor to plate, which matters when aligning multiple tables or work surfaces in a row. The 1 1/8 inch adjustable foot at the base of each leg introduces controlled vertical movement, enabling installers to dial in final height within that adjustment range once the work surface is standing. Because the leg body is 2-3/8 inches wide and square, positioning the mounting plate and leg along straight edges is straightforward, helping maintain alignment in relation to cabinet sides or worktop overhangs.

Using Rockwell Legs In Work Surface Projects

Where This Rockwell Table Leg Set Fits Best

The Rockwell table leg set from Peter Meier, Inc. is designed for use on work surface and table projects within the work surface and tables category. The 34-1/2 inch high leg profile targets installations where that dimension helps define the final working level once the work surface thickness is added. The 2-3/8 inch wide square leg cross-section creates a defined visual line at the corners, which suits projects that expose the leg as part of the finished appearance. The brushed steel finish ties these legs to other brushed components often used in woodworking or shop environments, helping maintain continuity when multiple metal elements are present around a bench or table. With a 4 9/16 inch (116mm) square mounting plate, the set supports layouts where the connection point between frame and surface is predictable across several units, which is useful when repeating the same table design.

How Rockwell Leg Details Support Consistent Setup

The 1 1/8 inch adjustable foot built into each Rockwell leg affects how installers handle real-world floor conditions, because that defined adjustment range provides room to correct minor unevenness without cutting leg material. The 34-1/2 inch fixed leg height, combined with the adjustable foot, means the working level can be set within a narrow band above or below that base dimension, which helps align neighboring surfaces to a common plane. The 2-3/8 inch square leg width simplifies squaring to table edges during layout, reducing the chance of twist at the corners when tightening fasteners. The 4 9/16 inch (116mm) square mounting plate offers a stable interface area that spreads load across a broader portion of the underside, supporting steady contact over time. The brushed steel finish presents a consistent surface that visually matches other brushed hardware in a project, which matters when work surfaces, tables, and support legs share the same environment.

Common Rockwell Table Leg Set Questions

Selecting This Rockwell Leg Set For Your Project

The Rockwell table leg set from Peter Meier, Inc. combines a 34-1/2 inch leg height, 2-3/8 inch wide square profile, brushed steel finish, 1 1/8 inch adjustable foot, and a 4 9/16 inch (116mm) square mounting plate, giving a defined set of dimensions and interfaces to plan around. When a project calls for these specific measurements in a table legs product class, choosing this set aligns the legs with the required work surface height, mounting footprint, and visual style. For work surface and table builds that need that combination, this Rockwell table leg set provides a coordinated group of supports ready to integrate into the overall design.