2-3/8" Wide x 34-1/2" High Square Rockwell Table Leg Set, Stainless Steel, 4/Set
Description
Rockwell Table Leg Set For Work Surfaces
Rockwell table leg set from Peter Meier, Inc. is a stainless steel table leg solution for work surfaces and tables where a consistent 34-1/2 inch height is required. The set combines 2-3/8 inch wide square legs with a matching 4 9/16 inch, or 116mm, square mounting plate, which creates a stable connection between the leg and the underside of the work surface. The stainless steel construction supports use in shop, commercial, or utility environments where metal legs are preferred over wood. The legs belong to the Work Surface & Tables category and the Table Legs product class, so they are intended to act as the primary support structure rather than as decorative trim. The 860-34-SS manufacturer part number clearly identifies this specific Rockwell leg configuration when matching to drawings or reordering for multiple projects.
Key Rockwell Table Leg Set Details
- The 2-3/8 inch wide square leg profile provides a compact footprint at the floor and mounting point, which helps when layouts demand support close to cabinet fronts or equipment without taking excess space.
- The 34-1/2 inch leg height establishes a work surface or table height in the typical base-cabinet range when combined with standard top thickness, supporting consistent ergonomics across adjoining runs.
- The stainless steel material gives a uniform metal appearance, which suits work surfaces and tables where exposed legs need to visually coordinate with other stainless elements in the room.
- The 4 9/16 inch, or 116mm, square mounting plate distributes load across a broad area under the top, which supports a solid feel at the connection point.
- The Rockwell table leg set design, categorized as Work Surface & Tables, aligns the product with projects that rely on legged support rather than full cabinet bases.
Mounting Height And Adjustment Function
The legs are described as table, counter and bar heights available, which means the Rockwell line covers multiple standard height ranges, so this 34-1/2 inch version can be selected when that specific height suits the layout. Each leg uses a 1 1/8 inch adjustable foot, which allows the installer to fine-tune finished height within that adjustment travel to accommodate slight floor unevenness while maintaining a level work surface. The 4 9/16 inch (116mm) square mounting plate creates a clear interface between the leg and the underside of the top, so the installer has a defined area for fastener placement and edge clearance during installation.
Using Rockwell Stainless Legs In Projects
Where These 2-3/8 Inch Square Legs Fit
The 2-3/8 inch wide x 34-1/2 inch high square Rockwell table leg set fits work surfaces and tables that need a slim, square stainless support at a base-cabinet-style height. The square profile gives the legs a straightforward geometry that aligns cleanly with straight countertop edges and cabinet lines. Because the legs are part of the Work Surface & Tables category, they are suitable wherever a top is supported by legs rather than full casework, such as free-standing tables or peninsulas. The stainless steel finish coordinates with stainless surroundings, which is useful in workshops or other installations where metal components are visible. The 4 9/16 inch (116mm) square mounting plate gives a defined footprint under the top, which can be planned into layouts that avoid conflicts with seams or under-mounted hardware.
Why The Mounting Plate And Foot Matter
The 4 9/16 inch, or 116mm, square mounting plate on each leg spreads the contact area under the work surface, which supports rigidity at the joint compared with very small attachment points. The square shape allows the plate to be oriented in line with the top edges, helping the installer reference the sides of the plate to front and side overhangs for repeatable alignment from leg to leg. The 1 1/8 inch adjustable foot gives vertical adjustment built into every leg, so slight differences in floor height can be taken up at the foot instead of altering the length of the legs. That adjustment travel also helps when multiple sets of these 860-34-SS legs are used across a long run, because the final leveling can be done over the full line of supports. Together, the mounting plate and adjustable foot provide predictable attachment and leveling for the Rockwell table leg set.
Common Questions About Rockwell Table Leg Set
What is the height of the Rockwell table leg set?
The Rockwell table leg set is 34-1/2 inches high, so it supports work surfaces or tables built around base-cabinet-style counter height when paired with a typical top thickness.
How wide are these square stainless steel table legs?
These Rockwell legs are 2-3/8 inches wide with a square profile, which provides a compact but stable support that fits close to cabinet lines and edges.
What mounting plate size do these table legs use?
The Rockwell table leg set uses a 4 9/16 inch, or 116mm, square mounting plate, which spreads load over a larger underside area for a solid connection.
Do these table legs have height adjustment at the foot?
The Rockwell leg design provides a 1 1/8 inch adjustable foot, allowing on-site fine-tuning of finished height to accommodate floor variation and achieve a level surface.
What material is the Rockwell 860-34-SS leg set?
The Rockwell 860-34-SS leg set is stainless steel, giving a metal support choice suited to visible work surface and table installations.
How is this product identified for matching or reorders?
This Rockwell table leg set is identified by manufacturer part number 860-34-SS, which links to this specific 34-1/2 inch stainless configuration.
Selecting This Rockwell Leg Set For Work Surfaces
The 2-3/8 inch wide x 34-1/2 inch high square Rockwell table leg set in stainless steel gives a defined solution when a metal legged support is needed at counter style height. With its 4 9/16 inch, or 116mm, square mounting plate and 1 1/8 inch adjustable foot, the 860-34-SS configuration provides clear mounting geometry and on-site leveling adjustment. For projects built around the Rockwell line, this set lets installers repeat the same height and appearance across multiple work surfaces and tables.