2-3/8" Wide x 40-3/4" High Square Rockwell Table Leg Set, Brushed Steel, 4/Set

Square Rockwell Table Leg Set For Stable Work Surfaces

Square Rockwell table leg set from Peter Meier, Inc. is a brushed steel table leg system designed for work surfaces and tables. The legs measure 2-3/8 inches wide and 40-3/4 inches high, so they provide a tall support option suitable for elevated work areas or bar-style surfaces where extra height is required. Each leg is part of a matched set of four, which keeps the height and appearance consistent around the perimeter of the work surface. The Rockwell name and defined dimensions help installers line this set up with existing layouts that call for a 40-3/4 inch leg height. The brushed steel finish gives the legs a uniform appearance that integrates cleanly with metal-framed or modern wood tops, helping projects present a professional, finished look on visible table bases.

Key Rockwell Table Leg Details For Projects

• The 2-3/8 inch wide square profile creates a substantial leg footprint, which supports work surfaces and tables in applications where a square, modern look is preferred.
• The 40-3/4 inch height positions this set in a range suitable for counter and bar style layouts, giving installers a defined leg height for elevated surfaces.
• The 1 1/8 inch adjustable foot allows fine tuning of overall leg height within a small range, which helps level the work surface when floors are uneven.
• The 4 9/16 inch (116mm) square mounting plate provides a broad connection area at the top of each leg, helping spread load into the underside of the work surface or table.
• The brushed steel finish on the leg bodies presents a consistent metal appearance, which supports use in exposed table bases where leg finish is part of the design.
• The product class as table legs within the work surface and tables category identifies this set as structural support for flat tops used in functional spaces.

Mounting Height And Adjustment For Rockwell Legs

This Rockwell leg set combines a fixed 40-3/4 inch body height with a 1 1/8 inch adjustable foot, so installers can work within a clear total height range when laying out tops. The square 4 9/16 inch (116mm) mounting plate at the top of each leg gives a defined footprint for positioning fastening points on the underside of the work surface. Because the legs are 2-3/8 inches wide and square, they register consistently at corners or along edges, which simplifies aligning multiple legs to a straight reference line during installation. The brushed steel finish remains the same from plate to foot, so once mounted and adjusted, the visible portion of each leg presents a uniform profile around the entire table or work surface.

Using Rockwell Table Legs In Workspaces

Where Rockwell Square Legs Fit Best

The Rockwell leg 4-piece set is specified within the work surface and tables category, so it is oriented toward supporting flat tops used as work or table areas. With each leg standing 40-3/4 inches high, this set suits counter or bar-style projects where taller working or sitting positions are needed, rather than low desk heights. The 2-3/8 inch square shape provides a visual and structural presence that pairs well with substantial tops, allowing the legs to sit clearly at corners or near edges without looking undersized. Because the mounting plate is 4 9/16 inches (116mm) square, the transition between leg and underside of the top stays compact while still offering a defined bearing area. The brushed steel finish supports use in settings where metal details are intentionally visible, such as open-frame tables or work surfaces in contemporary interiors.

Details That Support Repeatable Table Installs

The combination of a 40-3/4 inch nominal leg height and a 1 1/8 inch adjustable foot gives installers a predictable height band that can be repeated across multiple tables. That means once one top is set level using the adjustable foot, the same approach can be followed on subsequent units to keep finished heights consistent. The 2-3/8 inch square profile helps during layout because each leg presents equal dimensions in both directions, so aligning faces parallel with table edges becomes straightforward. The 4 9/16 inch (116mm) square mounting plate gives a clear template-sized area for locating mounting points on the underside of the top, which supports accurate spacing from edges and corners from one table to the next. Identifying the set by manufacturer part number 860-40-ST provides a stable reference when reordering, so future work surfaces can use the same leg geometry and brushed steel finish to match existing installations. As part of the Peter Meier Rockwell line, these legs keep their key measurements and appearance consistent, which is important when tying new counters or bar-height surfaces into previously completed runs in the same space.

Common Questions About Rockwell 40-3/4 Inch Legs

Select Rockwell Legs For Defined Counter Heights

This 2-3/8 inch wide by 40-3/4 inch high Rockwell table leg set from Peter Meier, Inc. combines a fixed leg body, a 1 1/8 inch adjustable foot, and a 4 9/16 inch (116mm) square mounting plate to support elevated work surfaces. The brushed steel finish and square profile keep the legs visually consistent across counters or bar-height tables where the base remains exposed. When a project calls for repeatable counter heights in the Rockwell line, this leg set provides a clearly defined option that aligns leg geometry, finish, and adjustment range in a single specification.