2-3/8" Wide x 40-3/4" High Square Rockwell Table Leg Set, Stainless Steel, 4/Set

Rockwell Table Leg Set For Sturdy Work Surfaces

Rockwell table leg set defines this 2-3/8 inch wide x 40-3/4 inch high square leg system as a matched group built for stable support on work surfaces and tables. The stainless steel construction resists typical shop and jobsite conditions, so the legs hold their appearance while supporting daily use in woodworking or commercial environments. The square profile creates a straight, predictable bearing line from the 4-9/16 inch square mounting plate down to the adjustable foot, which helps keep tops tracking true. With four legs in one coordinated set, projects needing a uniform stance, such as bar-height tables or counters, gain consistent height and alignment across all corners. The 40-3/4 inch height works for applications where a taller work surface is required, giving installers a known dimension to design around.

Key Rockwell Table Leg Set Work Advantages

• The 40-3/4 inch high legs provide a fixed reference height, which helps when laying out bar-height or tall work surfaces that must match adjacent cabinetry or counters.
• The 2-3/8 inch wide square profile offers a compact footprint, so legs fit near edges or corners while still giving adequate bearing area against the floor for stability.
• The stainless steel material withstands normal shop moisture and handling, which helps the legs maintain a consistent look on exposed installations such as bars or work tables.
• The 4-9/16 inch square mounting plate spreads load across more surface area on the underside of the top, supporting secure attachment in typical wood or composite tops.
• The set structure means all legs share the same height and details, which simplifies layout when leveling multiple corners on a single work surface or table project.

Mounting And Adjustment Details For Installation

The 4-9/16 inch square mounting plate on each leg provides a broad, flat interface to the underside of the table or work surface, which supports a solid mount when positioning near corners or structural rails. The 40-3/4 inch overall height defines the working level before foot adjustment, so installers can plan clearances beneath the top for equipment, knees, or storage. The 2-3/8 inch wide square tube keeps alignment simple because each face sits parallel or perpendicular to table edges, aiding in layout and visual straightness. An adjustable foot with 1-1/8 inch range lets installers fine-tune height, which helps level tops on uneven floors and align multiple surfaces in the same room.

Using These Stainless Steel Legs In Real Projects

Where This Table Leg Set Fits Best

The Rockwell table leg set, with 40-3/4 inch high square legs, suits applications where a taller surface such as a counter or bar-height work area is required. The stainless steel construction supports use in woodworking shops, commercial spaces, and similar environments where exposed metal needs to stand up to regular contact. The 2-3/8 inch wide square profile works well under narrow tops or along edges, because it occupies limited lateral space while still providing vertical support. The 4-9/16 inch square mounting plate gives enough area to engage typical structural rails or thick tops, which is useful when installing under engineered surfaces or solid wood slabs. Because the legs are part of a matched set, builders can rely on consistent dimensions at each corner, helping keep long runs of counters visually level. The adjustable foot lets each leg adapt to minor floor variations, which supports alignment of tops across multiple cabinets or bases.

Details That Support Repeatable Height And Alignment

The 40-3/4 inch nominal height serves as a predictable base dimension for repeat builds, so fabricators can design multiple installations around the same finished level. The 1-1/8 inch adjustable foot range offers fine-tuning capability for leveling, which reduces time spent shimming or modifying bases during final setup. The square 2-3/8 inch profile naturally aligns with straight cabinet lines and wall runs, giving installers clear reference faces when positioning legs relative to edges. The 4-9/16 inch square mounting plate helps distribute load and resist twisting, which supports long-term stability on taller tables where leverage forces are greater. The stainless steel material from Peter Meier, Inc., combined with the Rockwell leg design, gives shops a repeatable component that can be specified by the 860-40-SS part number for consistent future orders. Using the same leg design across multiple jobs makes layout, drilling patterns, and cut lists easier to standardize.

Common Questions About Rockwell Table Leg Installation

Choose Rockwell Legs For Tall, Stable Work Surfaces

The Rockwell table leg set from Peter Meier, Inc. combines 40-3/4 inch height, a 2-3/8 inch wide square profile, and stainless steel construction to support elevated counters and work tables. The 4-9/16 inch square mounting plate and 1-1/8 inch adjustable foot give installers practical control over leveling and load distribution. With all legs in one coordinated set defined by part number 860-40-SS, tradespeople can specify and repeat this solution across projects that demand consistent height and appearance. Select this set when a tall, square stainless steel table support matches your planned work surface layout.