Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rockwell single table leg gives you a dedicated support for work surfaces and tables, so you can build or repair installations around a known footprint. The Peter Meier, Inc. branding ties this leg to a recognized table hardware line, which helps keep project specifications consistent across multiple jobs. The 2-3/8 inch wide square design creates a compact profile, so the leg fits into tighter layouts while still defining a clear support point under the top. The black matte finish establishes a neutral, low-glare appearance, which helps the leg disappear visually under darker tops and in commercial spaces. At 40-3/4 inch high, this leg is sized for taller table, counter, or bar height applications, so you can bring different surface heights onto the same project using one Rockwell family. The single-leg format supports custom layouts, because you can position each leg exactly where the load or design requires.
The 1 1/8 inch adjustable foot built into this Rockwell single table leg provides height adjustment at the floor, which helps bring a tall work surface into level when the subfloor varies slightly. The adjustable range gives you room to fine-tune final height, so you can align this leg with adjacent casework or additional supports without changing the top. The 4 9/16 inch, or 116mm, square mounting plate at the top of the leg creates a defined interface to the work surface, which helps position the leg consistently when repeating the same layout across several tables. The square geometry of both the leg and mounting plate supports straight, 90-degree alignment to top edges, which keeps rows of legs visually consistent along the run.
This 40-3/4 inch high Rockwell single table leg is built for use on taller work surfaces, counter-height tops, or bar-height tables, so it serves well in shops, commercial spaces, and tall residential counters. The leg sits within the Work Surface & Tables category and the Table Legs product class, which positions it as a core structural support rather than decorative trim. The square 2-3/8 inch width allows the leg to sit close to corners or walls, which helps when you need support near the edge without overhanging the footprint. With a black matte finish, the leg blends into darker interiors or under-surface shadows, which keeps attention on the worktop or product display rather than the support hardware.
The 4 9/16 inch (116mm) square mounting plate on this Rockwell single table leg sets a consistent connection pattern for the tabletop, which streamlines layout when spacing multiple legs along a longer work surface. The square plate helps you align the leg parallel to top edges, which maintains straight rows on production benches and customer-facing counters. The 1 1/8 inch adjustable foot built into the leg gives you a controlled way to handle uneven floors, which reduces rocking and keeps equipment or materials steady on the surface. Because the foot adjustment lives at the bottom of the leg, you can dial in level after the top is fastened, which supports clean installations when working alone or on occupied sites. The black matte finish on the leg and mounting components maintains one consistent appearance from top connection down to the floor, which simplifies matching visible parts across a project built around Peter Meier Rockwell hardware.
The Rockwell single table leg is a table leg in the Work Surface & Tables category, so it functions as a structural support for tables and similar work surfaces.
This Rockwell single table leg is 40-3/4 inches high, so it suits taller table, counter, or bar-height installations needing that specific support length.
The Rockwell single table leg has a 2-3/8 inch wide square profile, so it presents a compact, straight-edged support that fits well near corners and walls.
The Rockwell single table leg uses a 1 1/8 inch adjustable foot, which allows height tuning at the floor so the work surface can be leveled over uneven subfloors.
The Rockwell leg mounting plate measures 4 9/16 inches, or 116mm, square, creating a defined top connection area that supports consistent leg placement on the surface.
This Rockwell single table leg has a black matte finish, so it provides a low-reflective appearance that blends into darker or commercial interiors.
The 2-3/8 inch wide x 40-3/4 inch high Rockwell single table leg in black matte provides a defined support solution for taller tables, counters, and bar-height work surfaces. With its 1 1/8 inch adjustable foot, this leg helps you establish level, stable tops over variable floors. The 4 9/16 inch (116mm) square mounting plate gives you a predictable mounting interface, which supports clean, repeatable layouts when installing multiple legs across a project. For projects that specify Peter Meier, Inc. Rockwell hardware, this leg aligns with the manufacturer part number 860-1S-02, so it fits directly into documented material lists and job records.
Sold In: 1 Each
