Square Rockwell Single Table Leg For Work Surfaces

Square Rockwell single table leg gives a work surface or table a 40-3/4 inch high support, so installers can build tall tables, counters, or bar-height surfaces from a consistent leg height. The 2-3/8 inch wide square profile creates a compact support footprint, which helps when you are working around toe spaces, equipment clearance, or tight layouts. The brushed steel finish presents a neutral metal surface, so the leg can blend with many commercial or residential work surface designs. This single leg format lets you place support exactly where a top needs it, which is useful on islands, peninsulas, or extended tops. The Peter Meier, Inc. Rockwell line identity and manufacturer part 860-1S-ST give a clear reference in project documentation, which supports repeat ordering on multi-room or multi-site jobs.

Key Rockwell Table Leg Details That Matter

• The 40-3/4 inch height positions a work surface, table, counter, or bar at a tall working level, which supports layouts needing higher tops for standing use or elevated seating.
• The 2-3/8 inch wide square leg shape concentrates support into a tight footprint, which helps when aligning legs with cabinet corners or keeping clearance near equipment and chair paths.
• The brushed steel finish provides a uniform metal appearance, which helps the leg coordinate with many hardware finishes and keeps visual focus on the top and casework.
• The 116mm square mounting plate gives the top a broad contact area, which spreads load over more surface and supports a stable attachment to the work surface.
• The single leg configuration lets you position support only where needed, which is useful for overhangs, open ends, or retrofit reinforcement on an existing work surface.
• The Peter Meier, Inc. Rockwell designation and part 860-1S-ST clearly identify the component, which helps installers match legs across multiple workstations or service replacements.

Mounting And Adjustment Details For This Leg

The 116mm square mounting plate on this Rockwell table leg gives a defined interface to the underside of the work surface, so installers can plan screw patterns and edge distances around that footprint. The table, counter, and bar height availability noted in the description frames this leg within a coordinated height family, which helps when a project mixes different working levels while keeping a related appearance. The 1 1/8 inch adjustable foot at the bottom of the leg offers vertical adjustment travel, which lets you fine-tune final top height inside that range and compensate for minor floor variation. That adjustable foot detail is especially useful along long runs of work surfaces, because it supports bringing multiple tops into a consistent plane.

Using The Rockwell Leg In Real Projects

Where This Brushed Steel Leg Fits Best

This brushed steel table leg sits in the Work Surface & Tables category, so it aligns naturally with shop benches, office workstations, and residential or commercial tables built from separate tops. The classification under Table Legs and the single leg format mean it can support corners, mid-spans, or open ends where casework does not reach the floor. With its 40-3/4 inch height, the leg suits higher tables, counters, or bar-style work surfaces, so it works well in spaces where people stand or sit on elevated stools. The 2-3/8 inch wide square profile keeps the support visually light under a top, which can help preserve knee space on overhangs or seating areas while still providing a defined structural element.

Why These Mounting Details Support Consistency

The 116mm square mounting plate gives every installation of this Rockwell leg the same plate footprint, which simplifies laying out screw positions and edge setbacks from one work surface to the next. This repeatable footprint helps installers standardize their drilling or pre-routing patterns, saving layout time on multi-unit runs. The 1 1/8 inch adjustable foot lets you set each leg within a controlled height band, which is valuable when tying a free-standing top into adjacent casework or appliances at similar levels. The brushed steel finish remains consistent from leg to leg, which helps project teams maintain a uniform look across several tables or stations. The Peter Meier, Inc. branding and distinct 860-1S-ST part number allow clear communication between designers, purchasers, and installers, reducing rework caused by mismatched components.

Common Questions About This Rockwell Table Leg

Selecting This Leg For Your Next Work Surface Run

This square Rockwell single table leg in brushed steel combines a 40-3/4 inch height, 2-3/8 inch wide profile, 116mm square mounting plate, and 1 1/8 inch adjustable foot, giving installers a defined, repeatable support component for tall work surfaces and tables.