Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3 inch wide 28 inch high square Rockwell table leg set describes a matched group of four Peter Meier, Inc. legs that support a work surface or table at a 28 inch height, giving a consistent base for standard table projects. Each leg has a square profile, so layouts around corners or cabinet ends line up visually and simplify measuring during buildout. The legs are finished in black matte, which reduces light reflection and visually recedes under dark tops, helping the surface read clean in offices or shops. The set belongs in the Work Surface & Tables category as table legs, so it fits directly into table or work surface builds rather than needing adaptation from other hardware. The product is identified by manufacturer part number 876-28-02, which ties this exact size, shape, and finish to future reorders or matching additions.
This Rockwell table leg set uses a 4 9/16 inch (116mm) square mounting plate, which provides a broad attachment area at the underside of the work surface and supports secure fastening around each corner. The wide plate shape helps spread pull-out forces over more fastener locations, which is useful when tops are moved or shifted during use. Each leg has a 1 1/8 inch adjustable foot, which gives vertical movement at the floor contact point so the installer can compensate for small floor variations. This adjustability lets the top sit level without trimming the leg tube, which preserves the full 28 inch structural length while dialing in final height across all four points.
The 3 inch wide square form of this Rockwell table leg set suits work surface and table applications where a solid-looking support is preferred, because the wider face visually anchors the top and helps distribute weight at each corner. Belonging to the Work Surface & Tables category with a Table Legs product class aligns these legs with desks, utility tables, or shop benches built around a 28 inch working height. The 4 9/16 inch square mounting plate under each leg provides a stable interface to wood, composite, or similar tops, so the load transfers through a broad attachment zone instead of concentrating at a narrow point. When used in a four-leg layout, the matched design of the legs keeps the table geometry predictable from corner to corner, which is valuable in runs of identical stations.
The 1 1/8 inch adjustable foot built into each leg gives meaningful height play under the nominal 28 inch structure, so slight floor irregularities can be handled at the foot rather than by shimming the top. This adjustability works together with the square 4 9/16 inch mounting plate, because a solid mount at the top plus micro-adjustment at the bottom helps the table sit stable even when only one side needs extra height. The black matte finish across the full leg, from tube to foot area, keeps visual distractions low as adjustments are made, which helps rows of tables still look uniform after leveling. With the manufacturer part number 876-28-02 tying these features to a single specification, repeat installations can apply the same leg and adjustment behavior across multiple rooms or projects.
The 28 inch height of each leg supports standard table-height projects, so work surfaces and tables align with typical seating and working positions in offices or shops.
The 1 1/8 inch adjustable foot provides vertical adjustment at the floor contact point, allowing precise leveling of the table on uneven floors while maintaining the full leg length.
The 4 9/16 inch square mounting plate offers a broad underside attachment area, distributing load across more fastener locations and supporting a stable connection to the work surface.
The 3 inch wide square profile increases the bearing area at each leg, which helps spread weight on the frame and supports a solid feel under work surfaces or tables.
The black matte finish provides a low-sheen appearance that helps the legs visually recede under darker tops, supporting clean lines in workrooms, offices, or utility spaces.
Part number 876-28-02 identifies this exact 3 inch wide, 28 inch high, black matte Rockwell leg set, which supports consistent reordering for future matching installations.
The Peter Meier, Inc. 3 inch wide x 28 inch high square Rockwell table leg set in black matte brings a defined height, integrated adjustment, and a broad 4 9/16 inch mounting plate into one coordinated group of legs. For building or standardizing tables and work surfaces within this height class, the matched set and clearly identified 876-28-02 specification support repeatable layouts from one project to the next. Select this Rockwell table leg set when a square 3 inch profile, 28 inch nominal height, and underside plate mounting align with your planned work surface design.
Sold In: 1 Set
