Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3 inch wide Rockwell table leg set describes a set of 40-3/4 inch high square table legs designed for work surfaces and tables, so it supports projects where a consistent leg height and footprint are important. The 3 inch wide square profile establishes a substantial support footprint, which matters when a table must carry typical work surface loads without feeling light. With a 40-3/4 inch high leg dimension, this set suits designs that call for a taller work surface or bar-height style installation, keeping top height in a predictable range. Being a table leg product from the Rockwell line by Peter Meier, Inc. places it within a family of work surface and table solutions, which helps match it to similar components on a job. The black matte finish defines the visual appearance, which matters when coordinating with dark tops or surrounding casework.
The Rockwell leg set uses a 4 9/16 inch, or 116mm, square mounting plate, so each leg connects to the underside of a top using a defined footprint that spreads load over a broader area. This square plate shape keeps the leg centered as it is fastened, which matters when positioning legs near corners or cabinet gables. An adjustable foot with 1 1/8 inch of travel is part of the leg design, allowing the installer to fine-tune final height relative to floor conditions while keeping the top level. That amount of adjustment helps handle typical variations in floor flatness without changing the fixed leg length, which keeps layout consistent from project to project.
This Rockwell table leg set is identified for Work Surface & Tables applications, so it is intended to carry tops used as workstations, counters, or bar-style tables. The 3 inch square profile gives each corner a solid footprint, which matters when workers lean on the edge or place tools and materials on the surface. With a height of 40-3/4 inches, the legs position the top at a taller working level, suited to counter or bar-height layouts where users stand while working. The 4 9/16 inch, or 116mm, square mounting plate provides a defined interface to the underside of the top, which helps spread loads and reduce stress around the fastener pattern on typical work surface materials.
The adjustable foot with 1 1/8 inch of travel is built into the Rockwell legs, so final height can be tuned after the top is in place while keeping all legs carrying load together. This adjustment range helps correct for floor unevenness over the run of a long work surface, which reduces rocking and keeps equipment or materials stable on the top. The black matte finish creates a consistent visual line under the surface, which matters when multiple tables or counters share the same room and need a coordinated appearance. The clear identification as the Peter Meier, Inc. Rockwell leg set with part number 876-40-02 aids repeat ordering when additional stations or matching tables are added to an existing installation.
The Rockwell legs are 40-3/4 inches high with an adjustable foot, so they support counter or bar-height style work surfaces where users typically stand while working at the top.
The 116mm square mounting plate provides a defined, broad contact area under the top, which spreads load and simplifies positioning each Rockwell leg at corners or structural points.
The adjustable foot with 1 1/8 inch travel lets the Rockwell legs compensate for floor unevenness, so the table or work surface can be leveled without altering the fixed leg length.
The Rockwell leg set is listed under Work Surface & Tables and Table Legs, so it is applied to support worktops, counters, and similar horizontal surfaces needing defined leg support.
The 3 inch square profile gives each Rockwell leg a substantial footprint at the floor and under the top, which helps support typical work surface loads with a stable stance.
The Peter Meier 876-40-02 designation uniquely identifies this Rockwell leg configuration, which helps match legs across multiple tables or during later expansion of a workspace.
The Rockwell table leg set from Peter Meier, Inc., in 3 inch wide square form and 40-3/4 inch height, offers a defined support solution for work surfaces and tables needing a taller stance. The 4 9/16 inch, or 116mm, square mounting plate and 1 1/8 inch adjustable foot work together to provide level, stable tops over typical floor variations. With the black matte finish and clearly marked 876-40-02 part number, this set aligns visual presentation and repeat ordering for new stations or added tables, so projects can use a consistent leg system across the workspace.
Sold In: 1 Set
