Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rockwell table leg set gives you four matching supports for building or upgrading work surfaces and tables where consistent height and appearance matter. The set is built around 3 inch wide square legs, so you get a substantial profile that handles typical work surface loads while keeping layouts visually uniform from leg to leg. Each leg stands 40-3/4 inches high, which suits applications built around that taller height when you need extra clearance under the surface for storage or equipment. The legs are finished in brushed steel, providing a clean, metallic look that pairs well with modern shop, office, or residential environments. The set is supplied by Peter Meier, Inc., so it aligns with other components in the Rockwell line when you are standardizing parts by brand across multiple projects.
Each Rockwell table leg in this 40-3/4 inch set is equipped with a 1 1/8 inch adjustable foot, giving a limited range of height adjustment at the floor. That adjustment allows you to compensate for slight floor unevenness so the work surface contacts all four legs without rocking. At the top, a 4 9/16 inch (116mm) square mounting plate provides a defined interface to the underside of the work surface. The plate size gives a broader attachment area than smaller brackets, which distributes load and helps keep the top anchored under typical use. The legs are designed as table, counter, and bar height components, so they align with projects spanning those general height ranges while still allowing final fine-tuning through the adjustable feet.
This Rockwell table leg set is specified for work surface and table applications, so it fits projects where a fixed support frame is required under a solid top. With each leg measuring 3 inches square, the support presents a solid visual mass that suits workbenches, counters, and bar-style tops that need a robust stance. The brushed steel finish integrates well into woodworking shops and commercial interiors where metal support components are common. Because the set covers table, counter, and bar heights, it supports layouts where multiple surface levels are used in the same space, letting you stay within the same Rockwell family for a consistent look. The 4 9/16 inch square mounting plate at the top of each leg gives you a defined zone for attachment under wooden, composite, or similar tops where a square plate fits the layout.
The 40-3/4 inch nominal leg height establishes a clear starting dimension across all four pieces, which simplifies layout when you are producing multiple identical surfaces that must align. When combined with the 1 1/8 inch adjustable foot, each leg can be fine-tuned to match the exact finished height requirement or to account for small differences in floor elevation, helping you bring the work surface into plane. The 3 inch square profile gives enough section width to resist twist under ordinary side loading, which supports alignment over time. The 4 9/16 inch (116mm) square mounting plate at the top standardizes the connection point, so once you establish a drilling or fastening pattern for one project, that pattern can be reused on subsequent builds. The Rockwell designation and manufacturer part number 876-40-ST allow installers and shops to reorder the same configuration whenever additional matching units are needed.
Each Rockwell table leg in this set is 40-3/4 inches high, which establishes a tall work surface or bar-style height when installed under an appropriate top.
The 1 1/8 inch adjustable foot allows small height changes at the floor, so the installer can bring all legs into contact and level the work surface on uneven substrates.
The Rockwell table leg set uses a 4 9/16 inch (116mm) square mounting plate, providing a broad connection area to spread loads under the work surface.
Each leg is 3 inches wide and square in section, which gives a substantial profile that supports typical work surface loads and helps resist racking forces.
The 876-40-ST Rockwell table legs have a brushed steel finish, offering a neutral metallic appearance that pairs well with many countertop and work surface materials.
This Rockwell table leg set is supplied by Peter Meier, Inc., and is identified by manufacturer part number 876-40-ST for specification and reordering.
The 3 inch wide x 40-3/4 inch high square Rockwell table leg set in brushed steel gives you four matching supports built around a 4 9/16 inch square mounting plate and a 1 1/8 inch adjustable foot. Those verified dimensions and components create a repeatable structure for tall work surfaces, counters, or bar-height installations that need consistent height and alignment. For projects where a defined leg size, finish, and part number simplify planning and future expansion, this Rockwell table leg set provides a clearly specified solution ready to integrate into your next work surface build.
Sold In: 1 Set
