
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
2 inch Diameter x 28 High Rockwell Single Table Leg defines both the height and the footprint of your work surface, giving you a consistent 28 inch table or counter support point for cabinets, desktops, or utility tables. The single leg format lets you support corners or overhangs without a full base, which helps when laying out custom runs or odd-shaped tops. The Peter Meier, Inc. branding ties this leg to a line known for work surface and table applications, so it fits naturally into shop-built furniture or commercial fixtures. Being part of the Work Surface & Tables category keeps its role clear on the job: it is the vertical support element, not a decorative trim piece, which helps when planning loads, ganging legs, or matching other components in the same project.
The 4 9/16 inch (116mm) square mounting plate on this Rockwell leg provides a defined interface to the underside of your work surface, giving you a clear target area for pre-drilling or layout marks. The 1 1/8 inch adjustable foot built into the leg offers height take-up at the floor, which helps when surfaces need to align across slightly uneven concrete or subfloors. With its 2 inch diameter and 28 inch height, the leg geometry stays consistent from piece to piece, supporting repeatable jig setups in the shop when tops are drilled in batches. Being a single table leg within the Work Surface & Tables range, it slots cleanly into layouts where other structural support exists along walls or cabinets and this leg supplies the free-end support.
This Rockwell single table leg, at 28 inches high, fits naturally under standard table and counter height work surfaces, so it works in offices, shops, or break areas that follow common height conventions. The 2 inch diameter keeps the profile lean, which helps under narrow tops or desk returns where a bulkier support could interfere with seating or storage. As a component within the Work Surface & Tables family, its primary role is to hold up table and counter tops rather than act as structural framing, which makes it well suited for freestanding islands or extensions anchored at one side. The aluminum silver finish creates a consistent appearance across multiple legs on the same run, so rowed tables or benching systems can share the same visual line without mixed finishes. The 4 9/16 inch (116mm) square mounting plate gives enough area for mounting under various top materials, helping support both deeper and shallower work surfaces where leg positions must shift to hit strong points.
The 28 inch height of this Peter Meier, Inc. Rockwell leg sets a fixed reference plane for your work surface, which simplifies leveling across several legs because all adjustment happens at the 1 1/8 inch adjustable foot. That adjustment range lets you compensate at the floor rather than cutting the leg, saving layout time when tying into existing cabinetry or other fixed-height elements. The 2 inch diameter shaft offers a predictable centerline for layout, so you can position legs precisely relative to corners, edges, or grommets without constant remeasuring. The 4 9/16 inch (116mm) square mounting plate has straight, easily measured edges that align with the underside of rectangular tops, which aids in quickly squaring legs to front edges during install. Being clearly identified by manufacturer part number 950-7S-71 means you can match this exact leg in future expansions or repairs, helping keep table runs consistent as spaces are reconfigured or extended over time.
The 28 inch high Rockwell Single Table Leg sets a standard table or counter support height, so tops land at a typical working level when combined with normal top thicknesses.
The 1 1/8 inch adjustable foot on this leg allows height tuning at the floor, which helps level the work surface when subfloors vary slightly from one leg position to another.
The 4 9/16 inch (116mm) square mounting plate provides a broad, flat interface to the underside of the top, distributing load and giving multiple fastener locations for stable attachment.
This Rockwell leg is classified under Work Surface & Tables, so it is used to support table and counter tops in furniture, shop, or workspace installations that match its 28 inch height.
The 2 inch diameter sets a compact yet stable profile, allowing sufficient strength while minimizing obstruction under desks, counters, or benches where leg clearance matters.
Manufacturer part number 950-7S-71 uniquely identifies this Peter Meier Rockwell leg, helping match existing installations or specify the same component across multiple projects.
This 2 inch Diameter x 28 High Rockwell Single Table Leg, aluminum silver from Peter Meier, Inc., gives you a defined 28 inch support height, a 4 9/16 inch (116mm) square mounting plate, and a 1 1/8 inch adjustable foot to align tops across real-world floors.
Sold In: 1 Each