Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2 inch Diameter x 28 inch High Rockwell Single Table Leg defines this component as a 2 inch round, 28 inch tall support, giving you a clear match for designs that call for a standard table-height metal leg. The 28 inch height positions work surfaces and tables at a typical sitting height, which helps align this leg with office desks, conference tables, and residential table projects. The 2 inch diameter tubular form creates a compact footprint, which is useful when you want leg clearance without overly bulky support at the corners. This leg is identified as a single table leg, so it serves as one structural support point in a multi-leg layout. The product sits in the Work Surface & Tables category and Table Legs class, so it is intended specifically for supporting horizontal tops in furniture and work areas where a defined leg component is needed.
The leg uses a 4 9/16 inch, or 116 mm, square mounting plate, giving you a defined plate size for laying out holes on the underside of a table or work surface. That square plate geometry provides a broad contact area at the top of the leg, which helps distribute loads into the top material at each corner or support point. The plate is centered over the 2 inch diameter tube, which simplifies positioning when you are working from edge offsets in your drawings. The specification stating table and counter heights available indicates that this Rockwell series covers both standard table-height and higher counter-height applications, so the 28 inch version clearly occupies the table-height position within that range on a project.
The 2 inch Diameter x 28 inch High Rockwell Single Table Leg in brushed steel works as a defined support for work surfaces and tables, aligning with the Work Surface & Tables category for practical use in furniture builds. The 28 inch height places the surface at a typical table level once you add the thickness of the top, which suits desks, meeting tables, and task work tables. Being a single leg component, it fits layouts where multiple identical legs are positioned at corners or along edges, such as rectangular desks or freestanding work surfaces. The brushed steel finish integrates visually with metal frames, pulls, and other hardware that share a brushed appearance, which supports cohesive detailing in commercial and residential interiors. The table and counter heights available statement identifies this leg as part of a system that covers different working levels, and the 28 inch version marks the table-height option within that system for consistent design across related pieces.
The 1 1/8 inch adjustable foot specification shows that this Rockwell leg incorporates an adjustment feature at the bottom, which allows the installed height to be altered by about 1 1/8 inch to respond to floor variations. That adjustment range gives you the ability to set final work surface height very precisely, which is useful when tables must line up with adjacent cabinetry or other tops. The adjustable foot also helps stabilize the table on uneven floors by letting you fine-tune each support point rather than relying on shims. The 4 9/16 inch (116 mm) square mounting plate dimension gives a clear reference when drilling or pre-planning hole patterns on the underside of the top, which supports repeatable layouts across multiple identical tables. The manufacturer part number 950-7S-ST provides a precise identifier, which helps keep replacements and additional legs consistent when extending rows of tables or matching previous installations on later phases of a job.
The 2 inch Diameter x 28 inch High Rockwell Single Table Leg supports standard table-height projects, because its 28 inch height places work surfaces at a typical sitting level once the top thickness is added.
The 1 1/8 inch adjustable foot on this Rockwell leg allows fine height changes, which helps level tables on uneven floors and align work surfaces with adjacent tops.
The 4 9/16 inch, or 116 mm, square mounting plate provides a defined fastening area, which spreads loads into the table top and simplifies accurate hole layout.
The 2 inch diameter defines a relatively compact tube size, which helps maintain leg clearance for chairs and movement while still giving a visible metal support at corners.
The brushed steel description indicates a brushed metal surface, which visually pairs well with other brushed steel components in modern table and work surface designs.
This table leg is identified by manufacturer part number 950-7S-ST, which allows straightforward reordering when additional matching legs are needed on future phases.
The 2 inch Diameter x 28 inch High Rockwell Single Table Leg in brushed steel offers a defined 28 inch table-height support with a 2 inch round profile, a 4 9/16 inch square mounting plate, and a 1 1/8 inch adjustable foot for leveling. With its Peter Meier, Inc. branding and specific 950-7S-ST part number, it aligns with work surface and table applications that call for a clearly specified metal leg component. Use this Rockwell leg where a table-height brushed steel support with adjustable footing and a square mounting plate matches your layout requirements.
Sold In: 1 Each
