2" Diameter x 34-1/2" High Rockwell Table Leg Set, Aluminum Silver, 4/Set

Rockwell Table Leg Set For Stable Work Surfaces

Rockwell table leg set defines this Peter Meier, Inc. solution as a matched group of support legs for building or refurbishing tables and counters. The 2 inch diameter design establishes a sturdy vertical support profile, which helps carry typical work surface loads without looking bulky in finished installations. Each leg stands 34-1/2 inches high, so the set fits standard table-height applications where a consistent working plane is needed across multiple cabinets or frames. The aluminum silver finish identifies a neutral, metallic look that works in many shop, office, or residential environments without clashing with common laminate or wood tones. Being categorized as table legs in the work surface and tables family positions this set specifically for supporting tops, rather than lighter decorative elements, which keeps product selection straightforward on cabinet and fixture projects.

Key Rockwell Table Leg Set Details

• The 2 inch diameter construction establishes a stable footprint at each corner, which helps resist racking forces on the table or counter during everyday loading and lateral movement.
• The 34-1/2 inch leg height sets a predictable finished surface elevation for table-height projects, which simplifies layout when aligning adjacent cabinets, panels, or support structures.
• The aluminum silver finish defines the visual character as a modern metallic tone, which works well where an industrial or contemporary appearance is desired around exposed table bases.
• The set is identified as part number 950-34-71 from Peter Meier, Inc., which gives installers a precise reference when matching existing Rockwell installations or planning repeat projects.
• Being sold as a set of 4 legs ties directly to typical four-corner table layouts, which supports straightforward planning for rectangular or square work surface designs.

Mounting And Adjustment Details For Rockwell Legs

The Rockwell table leg set uses a 4 9/16 inch, or 116mm, square mounting plate, which defines a clear interface area for connecting each leg to the underside of a work surface or supporting frame. This mounting plate format gives fabricators a known footprint when drilling or pre-milling attachment locations near corners or support points. An integrated 1 1/8 inch adjustable foot at the base of each leg provides height fine-tuning within that range, which helps installers compensate for minor floor unevenness or construction tolerances while holding the working surface close to the intended elevation. The combination of fixed 34-1/2 inch leg height and adjustable foot travel offers a predictable overall height window, which supports consistent results across multiple tables installed in the same room or line.

Using Rockwell Table Legs In Real Projects

Where This 34-1/2 Inch Leg Set Fits Best

The 34-1/2 inch high Rockwell table leg set from Peter Meier, Inc. fits jobs targeting standard table-height work surfaces, where users need a comfortable working level above the floor. In workshop, office, or residential settings, this fixed dimension supports common applications such as freestanding tables or work counters built to match other furnishings at similar heights. The 2 inch diameter shape keeps the leg profile substantial enough for regular use, which matters when tables experience frequent loading changes or movement. The aluminum silver color positions the set for installations where exposed metal elements contribute to the overall design, such as contemporary interiors or utility workspaces with visible under-structure. Because the product falls under work surface and tables in the table legs class, it aligns with applications where the legs serve as primary vertical supports rather than occasional decorative pieces, which streamlines selection when planning structural layouts.

Details That Support Repeatable Height And Alignment

The 4 9/16 inch, or 116mm, square mounting plate on each Rockwell leg creates a defined attachment zone, which aids in repeatable placement across multiple tops. Installers can position plates consistently at measured offsets from corners, improving uniformity from table to table in a project run. The 1 1/8 inch adjustable foot at the bottom of each leg introduces a controlled adjustment range, which helps refine final height without altering the fixed leg body or modifying the top. This adjustability supports fine tuning when floors vary slightly in level, so the work surface can sit stable across all four legs instead of rocking. With each leg starting from a 34-1/2 inch nominal height, the adjustment function preserves a narrow, predictable finished height band, which assists designers and fabricators who are coordinating tables with surrounding cabinetry, equipment, or seating heights that depend on consistent alignment.

Common Questions About Rockwell Table Leg Set Use

Selecting This Rockwell Set For Your Next Build

The 2 inch diameter x 34-1/2 inch high Rockwell table leg set in aluminum silver provides a defined combination of leg height, diameter, mounting plate size, and adjustment range for table and counter projects. With a 4 9/16 inch, or 116mm, square mounting plate and a 1 1/8 inch adjustable foot on each leg, the set offers both predictable structure and on-site height tuning for level work surfaces. Sold in a set of 4 legs from Peter Meier, Inc., part number 950-34-71, this solution aligns directly with typical four-corner layouts for tables and counters where consistent elevation and straightforward mounting are priorities.