2" Diameter x 34-1/2" High Rockwell Table Leg Set, Brushed Steel, 4/Set

Rockwell Table Leg Set For Stable Work Surfaces

Rockwell table leg set defines a consistent support solution for work surfaces and tables using a matched group of legs from Peter Meier, Inc., which matters when a project calls for uniform appearance and height across an entire run. The 2 inch diameter design gives each leg a defined profile size, so planning layouts around clearances and edge overhangs stays straightforward on both cabinets and free-standing tables. Each leg stands 34-1/2 inches high, so installers can create table or counter-height work areas that follow a known dimension during cabinet and top layout. The brushed steel finish gives the set a specific visual and material identity, which matters on exposed installations where the leg becomes part of the overall design language. Being categorized as table legs for work surfaces and tables keeps the application focused on supporting horizontal tops in woodworking and similar projects.

Key Rockwell Table Leg Set Work Details

• The 2 inch diameter on each leg defines a predictable footprint where it meets the floor, which helps when spacing legs around corners, cabinet bases, or under smaller tops where clearance around edges and nearby components is limited.
• The 34-1/2 inch overall height establishes a fixed starting dimension for table or counter-height layouts, which matters when matching existing surfaces, building continuous runs, or coordinating with appliance and cabinet elevations.
• The brushed steel finish gives the legs a specific appearance that remains consistent across the set, which is important when legs are visible around islands, peninsulas, or open workstations where uniform look is part of the design.
• The manufacturer identification as Peter Meier, Inc. with part number 950-34-ST ties this leg set to a defined product line, which matters when specifying parts for repeat work or documenting components for future orders.
• The product classification under Work Surface & Tables and Table Legs confirms the legs are intended to support tops, which helps keep selection aligned with projects that require structural support beneath countertops, benches, or similar surfaces.

Mounting And Height Details For Installers

The Rockwell table leg set uses a 4 9/16 inch (116mm) square mounting plate at the top of each leg, so installers work with a defined bearing area when fastening the legs to wood or similar substrates. That square plate shape provides straight edges and corners, which makes it easier to align the leg relative to cabinet sides, gables, and top edges during layout. An adjustment range exists through the 1 1/8 inch adjustable foot at the base of each leg, giving flexibility when fine-tuning final height. That adjustable foot is integral to compensating for floor variation within that range, helping to keep the supported work surface level across multiple legs in typical installations.

Where Rockwell Table Leg Set Fits Best

Using These Legs Under Tables And Counters

This Rockwell table leg set is identified for use with work surfaces and tables, so its role focuses on supporting horizontal tops in woodworking and interior projects. The 34-1/2 inch height works in applications where the finished top needs to sit in a typical table or counter range, letting installers coordinate that dimension with surrounding cabinetry or panels. With a 2 inch diameter, each leg occupies a defined cylindrical space under the top, which helps when positioning them away from knees, doors, or drawers while still carrying the load of the surface. The brushed steel material presence gives these legs a specific visual contribution beneath open overhangs, islands, or freestanding tops, so designers can factor that look into the overall room plan alongside laminates, wood species, and hardware.

Details That Support Level, Repeatable Installs

The 4 9/16 inch (116mm) square mounting plate on every leg standardizes how the legs meet the underside of the top, which supports repeatable layouts when multiple legs are used in a row or mirrored from one side of a cabinet run to the other. That consistent plate size allows installers to pre-plan screw hole patterns and edge setbacks around a fixed geometry, simplifying shop jigs or on-site marking. The 1 1/8 inch adjustable foot at the bottom of each leg provides controlled height adjustment, which helps align the finished work surface across irregular flooring while staying within the defined adjustment range. Because the height, diameter, and mounting plate dimensions are all specified, project drawings and cut lists can call out this Rockwell table leg set by part number 950-34-ST for clear communication between design, shop, and field teams.

Common Questions About Rockwell Table Leg Set Use

Selecting This Rockwell Table Leg Set For Projects

The Rockwell table leg set from Peter Meier, Inc. delivers a defined combination of 34-1/2 inch height, 2 inch diameter, brushed steel finish, 4 9/16 inch square mounting plate, and 1 1/8 inch adjustable foot, giving installers a clearly specified support option for work surfaces and tables where consistent dimensions and appearance are important.