
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
2 inch Diameter 34-1/2 High Rockwell Single Table Leg defines the support point for a table or work surface that needs a fixed metal leg. The 2 inch diameter steel profile concentrates strength into a compact footprint, which helps when legs must clear storage, knees, or equipment under the top. The 34-1/2 inch high dimension positions the surface for table-height projects where consistent finished height matters across multiple installs. A black matte finish presents a neutral, low-glare look that blends with many tops and hides minor marks in busy shop or commercial environments. The Rockwell leg design from Peter Meier, Inc. gives fabricators a repeatable part number for build standards. Used as a single leg, it suits peninsula ends, desk returns, and similar layouts where only one post is required.
The leg uses a 4 9/16 inch (116mm) square mounting plate, giving a broad interface to the underside of the top so loads spread over more surface area at the attachment point. That plate size also creates a predictable bolt pattern footprint for jigs or production drilling. An adjustable foot with 1 1/8 inch of travel lets installers fine-tune the final height of the table or counter, so they can match adjacent cabinets or legs without re-cutting parts. The adjustment range also helps take up floor variation, keeping the surface solid on uneven concrete or subfloors. Combined with the fixed 34-1/2 inch leg length, the foot adjustment supports a tight finished-height band across multiple projects.
This Rockwell single table leg at 34-1/2 inches high fits table-height applications that rely on point supports rather than continuous casework. In office or shop layouts, it suits work surfaces that run off a wall of cabinets, where one outer corner needs a leg to carry that end. On freestanding tables, using this 2 inch diameter post on corners or mid-spans can reduce visual bulk compared to heavier uprights while still marking a solid support location. The 4 9/16 inch square mounting plate gives a defined zone on the underside of the top, which helps during layout when multiple legs or cabinet connections share the same panel. Because the leg is a single component with integrated plate and adjustable foot, it turns into a repeatable solution whenever designers call for exposed metal posts under wood, laminate, or composite tops in table-height zones.
The 34-1/2 inch nominal height combined with the 1 1/8 inch adjustable foot provides a working band that can track with typical table and light counter installations, keeping surfaces in line along long runs. When a floor bows or drops, the adjustable foot can be set within its travel range so each leg carries its share without shims between plate and top, which keeps the joint stack clean. The 2 inch diameter tube presents a straight, regular profile, which gives installers a reliable visual for plumb when sighting along multiple legs. The 4 9/16 inch (116mm) square mounting plate sets a consistent geometry at the top of every leg, allowing shops to standardize drilling patterns in tops or use guides in production. The black matte finish helps hide handling marks picked up during fitting and adjustment so the installed leg retains a professional appearance in exposed locations. The specific part number 950-8S-02 ties all of these dimensions and finish details together, supporting consistent results across repeat jobs, service replacements, or expansions of existing workstations.
The 34-1/2 inch Rockwell single table leg with its adjustable foot supports table-height work surfaces, so tops land in a comfortable range for desks and general-purpose tables.
The adjustable foot with 1 1/8 inch travel lets installers fine-tune leg height, matching adjacent supports and compensating for floor variations to keep the surface stable.
The 4 9/16 inch square mounting plate spreads load over a wider area on the underside of the top and establishes a consistent bolt pattern for layout and production work.
A single Rockwell table leg often supports open ends of counters, desk returns, or peninsula-style tops where one post is needed to carry the outboard corner.
The Peter Meier, Inc. part number 950-8S-02 identifies this Rockwell leg configuration, tying together the 2 inch diameter, 34-1/2 inch height, black matte finish, and mounting details.
The black matte finish keeps reflections low and visually recesses the leg, helping it blend with many top materials and disguise light handling marks in exposed areas.
This 2 inch diameter x 34-1/2 inch high Rockwell single table leg from Peter Meier, Inc., with its 4 9/16 inch square mounting plate and 1 1/8 inch adjustable foot, offers a defined, repeatable support for table-height work surfaces in shops, offices, and commercial projects.
Sold In: 1 Each