2" Diameter x 34-1/2" High Rockwell Single Table Leg, Aluminum Silver

2 Inch Diameter 34-1/2 Inch Table Leg For Work Surfaces

The 2 inch diameter 34-1/2 inch table leg from Peter Meier delivers a Rockwell single leg solution for supporting work surfaces and tables at a consistent height, which helps keep runs level across cabinets and bases. The 34-1/2 inch high design sets a standard work surface height when paired with typical tops, so installers can match existing conditions in kitchens, shops, and commercial spaces. The leg uses an aluminum silver finish, which provides a neutral, professional look that blends with common hardware and laminate colors. A 1 1/8 inch adjustable foot at the bottom lets you compensate for floor variations within that range, helping you dial in final surface level without shimming under the plate. This Rockwell single table leg format works as a straightforward structural support for free-standing ends, overhang support points, or independent work tables.

Key Rockwell Single Table Leg Working Advantages

• The 2 inch diameter construction gives the Rockwell single table leg a compact footprint while still presenting a solid vertical support, which helps keep the leg visually light without sacrificing its role under typical work surface loads.
• The 34-1/2 inch high dimension positions the leg for table and counter heights, so you can carry the same part across multiple work surface applications where standard-height bases are used.
• The 1 1/8 inch adjustable foot built into the leg provides on-site height tuning, which lets you correct for sloping or uneven floors by turning the foot instead of altering the work surface or structure.
• The 4 9/16 inch (116mm) square mounting plate at the top spreads load over a wider area of the underside, which improves stability and helps resist racking forces on the connection point.
• The aluminum silver finish on the table leg delivers a clean metallic look that coordinates with many contemporary hardware lines, which supports consistent visual details across cabinets, panels, and exposed supports.

Mounting And Height Adjustment Details For Installers

This Rockwell single table leg uses a 4 9/16 inch (116mm) square mounting plate, giving you a defined footprint for layout on the underside of the work surface. That square geometry simplifies positioning along edges or corners, which is useful when you need consistent setbacks on multiple legs. The integrated 1 1/8 inch adjustable foot at the bottom provides a built-in mechanism for small height corrections, so you can establish a target plane with the plate and then fine-tune final elevation by adjusting the foot. At 34-1/2 inches high, the leg works within table and counter height ranges, allowing a single component to serve under different surface materials while still supporting a level, ergonomic work height.

How This Rockwell Table Leg Supports Real Projects

Where This 34-1/2 Inch Leg Is Typically Used

The 34-1/2 inch high Rockwell single table leg is suited to work surfaces and tables where a standard height is required, such as shop benches, utility tables, or counter-height runs. When you use this leg under a worktop, the 2 inch diameter profile offers a modest visual presence, so it works well at exposed corners or along open sides of peninsulas. The aluminum silver finish supports use in commercial and residential environments where visible table legs are part of the overall design, allowing the support to visually match other silver-toned components. With a 4 9/16 inch square mounting plate, the leg is practical for installations where you want a clear, square layout reference against the underside edges for repeatable positioning across multiple units.

Details That Help Repeatable Height And Alignment

The integrated 1 1/8 inch adjustable foot on this table and counter height leg plays a central role in achieving consistent finished heights across a project. By dialing the foot within its adjustment range, you can correct for uneven floor conditions while still keeping the mounting plates aligned to a common plane, which simplifies setting multiple legs to the same elevation. The 4 9/16 inch (116mm) square mounting plate gives you four clear edges to reference off the work surface perimeter, which helps when you lay out several legs along a line or at mirrored positions. Because the leg stands 34-1/2 inches tall, it is suitable where you want to standardize work surface heights across adjacent cabinetry and freestanding tables, reducing height transitions that can interrupt workflows along a run of tops.

Common Questions About The Rockwell Single Table Leg

Select This Rockwell Leg For Standard-Height Surfaces

The 2 inch diameter x 34-1/2 inch high Rockwell single table leg in aluminum silver combines a defined mounting plate, a 1 1/8 inch adjustable foot, and a table and counter height design, giving you a repeatable way to support work surfaces. When you need a Peter Meier leg that balances straightforward installation with on-site height tuning, this 950-8S-71 model offers the key dimensions and adjustment range to keep tops aligned across your project.