Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3 inch Diameter x 28 inch High Rockwell Table Leg Set gives you a matched group of legs for building or supporting work surfaces and tables at standard table height. The Peter Meier, Inc. design uses a 3 inch diameter leg profile, which distributes load over a wider tube for stable support during everyday use. Each leg in this Rockwell set stands 28 inches high, so the finished surface height suits typical seated work or dining applications when planned with common top thicknesses. The black matte finish provides a neutral, low-glare appearance that blends with many cabinet and casework styles. An integrated 1 1/8 inch adjustable foot on each leg allows height fine-tuning, which helps align the finished surface when floors are uneven or when you need to match adjacent counters. This combination of fixed height and micro adjustment supports accurate layout on site.
The Rockwell table leg set uses a 4 9/16 inch (116mm) square mounting plate at the top of each leg, so the connection area to the work surface is clearly defined for layout. That square footprint makes it straightforward to orient legs along edges or at corners while keeping consistent setbacks. With a 28 inch fixed tube height matched to a 1 1/8 inch adjustable foot, the assembly offers both predictable base height and on-site adjustability. The adjustable foot supports fine changes when aligning multiple tables side by side, or when tying into existing cabinetry at similar heights. This combination of plate interface and foot travel supports repeatable installations across several units on a project.
This Peter Meier, Inc. Rockwell leg set sits in the Work Surface & Tables category, so it is designed around typical table and work surface applications. With each leg measuring 28 inches high and 3 inches in diameter, the set supports standard seated-height tables, desks, and light-duty workstations built from a wide range of panel or solid tops. The black matte finish allows the legs to integrate into commercial interiors, break rooms, and shop spaces without drawing visual attention away from casework or branding elements. Because the mounting plate is 4 9/16 inches (116mm) square, installers can consistently position legs at corners or inboard locations while keeping clear and repeatable reference distances from edges on multiple identical units. This supports projects where several tables must align visually in a row or cluster.
The integrated 1 1/8 inch adjustable foot on every leg provides on-site leveling capability, which matters when floors are out of flat or when combining this Rockwell set with nearby counters. That adjustment travel lets the installer compensate for variations without modifying the leg tubes or shimming the mounting area, saving time during layout and trim. The 3 inch diameter tube helps resist wobble because the wider column shape distributes loads more evenly into the 4 9/16 inch (116mm) square mounting plate and the adjustable foot at the floor. The matched black matte finish across the full set keeps the appearance uniform from leg to leg, which is important when tables are arranged together and viewed in a line. With manufacturer part number 976-28-02, it is straightforward to specify or reorder the exact same Rockwell configuration for future expansions or replacements on the same job.
The 3 inch Diameter x 28 inch High Rockwell Table Leg Set uses 28 inch legs with a 1 1/8 inch adjustable foot, so the usable height range supports standard seated table applications with fine leveling.
The 3 inch diameter leg design spreads load over a wider tube, which helps reduce wobble and supports a more solid feel under side loads on work surfaces and tables.
The 4 9/16 inch (116mm) square mounting plate creates a defined interface area to the top, distributing forces and helping keep leg locations consistent from table to table.
The black matte finish provides a neutral, low-glare appearance, so the legs visually blend into many commercial and residential interiors without reflecting overhead lighting.
The 1 1/8 inch adjustable foot allows small height corrections at each leg, which helps achieve a level top across uneven floors or when aligning multiple tables in a row.
Manufacturer part number 976-28-02 identifies this specific 3 inch Diameter x 28 inch High Rockwell Table Leg Set in black matte, which simplifies specifying and reordering for future projects.
The 3 inch Diameter x 28 inch High Rockwell Table Leg Set in black matte gives you a coordinated solution for table and work surface projects that need standard height and on-site adjustment. The 4 9/16 inch (116mm) square mounting plate and 3 inch diameter legs provide a clear structural interface between top and floor, while the 1 1/8 inch adjustable foot supports precise leveling. With the Rockwell design from Peter Meier, Inc. and part number 976-28-02, it is straightforward to specify this configuration wherever you need consistent appearance and performance across multiple tables or workstations on a job.
Sold In: 1 Set
