3" Diameter x 28" High Rockwell Table Leg Set, Chrome, 4/Set

3 Inch Diameter 28 Inch Table Leg Set For Work Surfaces

3 inch diameter 28 inch table leg set describes a Rockwell series leg solution from Peter Meier, Inc. that supports standard table-height work surfaces. The 28 inch height establishes a table-level working surface when paired with typical tops, which helps maintain consistent ergonomics across multiple stations. The chrome finish on these legs provides a clean, professional look that suits work surfaces and tables in visible areas where appearance matters. As a table leg set in the Work Surface & Tables category, this product is intended to carry and stabilize fixed worktops, so it can be used where dedicated support is required rather than mobile bases. Being a Peter Meier, Inc. Rockwell leg solution with manufacturer part 976-28-C1 ties this set to a recognizable hardware line, which simplifies reorders or matching existing installations in the same space.

Key Rockwell Table Leg Details For Projects

• The 3 inch diameter leg profile creates a substantial support column, which helps distribute load across a broader footprint and can improve stability on heavier work surfaces when legs are placed appropriately.
• The 28 inch nominal height positions the work surface at a common table level, which supports consistent layout and alignment when multiple tables or workstations share the same leg type.
• The 1 1/8 inch adjustable foot built into each leg provides height adjustment, which allows fine-tuning of level on uneven floors and helps eliminate minor rocking without modifying the work surface.
• The 4 9/16 inch, or 116 mm, square mounting plate at the top of each leg offers a defined fastening area, which helps spread fastener loads into the underside of the work surface.
• The chrome finish on the Rockwell legs creates a smooth, reflective surface, which pairs well with modern work surface materials and can complement other visible metal hardware in the installation.

Mounting Plate And Adjustable Foot For Accurate Fit

The 4 9/16 inch (116 mm) square mounting plate on each Rockwell table leg establishes a clear footprint for connecting the leg to the underside of the work surface, which helps position each leg consistently from project to project. With a defined square plate, installers can mark out plate locations and maintain repeatable leg spacing across multiple tables using the same layout. The integrated 1 1/8 inch adjustable foot at the bottom of each leg provides vertical travel, which allows the finished height to be tuned after the top is in place so the work surface can be brought into plane with adjacent units. This combination of mounting plate and adjustable foot supports accurate alignment, which helps reduce rework when setting several tables or counters in a row.

Using Chrome Rockwell Table Legs In Workspaces

Where 28 Inch Rockwell Legs Are Typically Applied

The Rockwell table leg set from Peter Meier, Inc., with a 28 inch height and 3 inch diameter, is designed for use under work surfaces and tables that need a fixed support structure. The legs fall within the Work Surface & Tables, Table Legs product class, which points to applications such as shop work tables, office workstations, and utility tops where a stable base is required. Because the legs are supplied as a coordinated set associated with manufacturer part 976-28-C1, they can be used across multiple tables in the same room to maintain a consistent appearance and working height. The chrome finish lets the legs serve in locations where they remain visible under the top, such as open-frame tables or desks, so functional support and visual consistency can be handled with the same component choice.

Why Adjustable Feet And Plates Support Consistent Results

The 1 1/8 inch adjustable foot on each leg affects how the final table height can be tuned after installation, which is useful when floors vary slightly from one corner of the room to another. By dialing the feet within their adjustment range, installers can set the work surface so it sits solidly on all legs and aligns with nearby tops that also rely on Rockwell legs. The 4 9/16 inch (116 mm) square mounting plate provides a predictable attachment interface for every leg in the set, which helps keep the leg alignment square to the work surface and repeatable across multiple builds. When the same plate dimensions and leg diameter are used from table to table, jigs or templates can be created around those dimensions, which speeds layout and installs while maintaining uniform leg placement and visual lines along a row of tables.

Common Questions About Rockwell Table Leg Set 976-28-C1

Selecting This Rockwell Leg Set For Your Project

The Rockwell 3 inch diameter x 28 inch high table leg set from Peter Meier, Inc. combines a defined 4 9/16 inch mounting plate, 1 1/8 inch adjustable foot, and chrome finish to support stable, visually consistent work surfaces. When a project calls for standard-height tables or worktops using a recognizable leg format such as manufacturer part 976-28-C1, this configuration provides clear dimensions for planning layouts, building jigs, or matching existing Rockwell installations. For work surfaces and tables that benefit from both clean chrome appearance and on-site height adjustment, this leg set offers a straightforward way to support and level the top during final setup.