3" Diameter x 40-3/4" High Rockwell Table Leg Set, Chrome, 4/Set

Rockwell Table Leg Set Chrome For Sturdy Worktops

Rockwell table leg set chrome uses 3 inch diameter steel legs at 40-3/4 inch high, so the support matches typical table, counter, and bar height layouts in a shop, office, or commercial space. The set is part of the Rockwell line from Peter Meier, Inc., giving installers a clearly identified 976-40-C1 component for planning repeat jobs. The legs sit on a 1 1/8 inch adjustable foot, which lets you fine-tune height to compensate for floors that are out of level so tops sit solid and do not rock. Each leg connects to a 4 9/16 inch square mounting plate, spreading the load at the top of the leg so fastening points work over a broader surface area. This combination of fixed leg height, adjustment range, and defined mounting plate size streamlines layout, drilling, and installation.

Key Rockwell Table Leg Set Job Advantages

• The 3 inch diameter legs provide a broad support column, which helps distribute weight from the work surface down to the floor for a solid feel.
• The 40-3/4 inch overall height places the top in a range that suits table, counter, and bar height projects when combined with common top thicknesses.
• The 1 1/8 inch adjustable foot gives vertical travel, letting you bring multiple legs into the same plane where floors vary so the surface carries load evenly.
• The 4 9/16 inch square mounting plate creates a generous fastening footprint, which simplifies aligning screw locations and resists twisting forces at the joint.
• The chrome finish on the Rockwell legs delivers a clean, metallic look that fits exposed modern work surfaces where the support structure stays visible.
• The set configuration groups four matching legs under one 976-40-C1 part number, which helps standardize ordering for repeat installations using the same layout.

Mounting Heights And Adjustment For Clean Installs

The 40-3/4 inch high Rockwell leg dimension gives you a known starting height, so you can design tables, counters, or bar tops by subtracting top thickness from that measurement to reach a working surface height. The 1 1/8 inch adjustable foot at the base adds a controlled range of fine-tuning, allowing you to bring all four legs to the same effective height when a subfloor runs out of level. With a 4 9/16 inch square mounting plate at the top of each leg, the interface to the underside of the surface is clearly defined, which simplifies laying out screw patterns and matching plate location to framing or support rails. Having a fixed leg length plus an adjustment section reduces layout guesswork across multiple installs built to the same specification.

Using 3 Inch Chrome Rockwell Legs In Projects

Where These 40-3/4 Inch Rockwell Legs Work Best

The Rockwell table leg set uses a 3 inch diameter profile, so each leg offers a substantial visual and structural presence under work surfaces in offices, shops, or residential projects. At 40-3/4 inch high, these legs suit applications designed around table, counter, and bar heights, giving you flexibility to use the same component across different stations by varying top thickness. The 4 9/16 inch square mounting plate connects the leg to the underside of the surface in a broad pattern, which fits well with laminated tops, composite panels, or solid surfaces where the load benefits from a larger bearing area. The chrome finish makes the legs appropriate for installations where they remain fully visible, such as freestanding tables, work counters, or bar-height surfaces in open rooms.

Why Mounting Plate And Adjustable Foot Save Rework

The 4 9/16 inch square mounting plate on each Rockwell leg defines a consistent interface, which streamlines drilling and screw layout because you repeat the same pattern from project to project. That predictable connection point helps installers align legs at corners or along edges so the support pattern matches the design without repeated measuring. The 1 1/8 inch adjustable foot under each 40-3/4 inch leg lets you correct for floor variations that would otherwise telegraph into a rocking top, so the finished surface sits stable under load. By pairing a fixed steel tube length with an adjustment section, the Rockwell design lets you rough-set the surface height during fabrication, then dial in final level onsite with the adjustable foot. This sequence can reduce on-site modification because the combination of leg height, adjustment range, and plate size is known in advance and matched to the 976-40-C1 part number for consistent results.

Common Questions About Rockwell Chrome Table Legs

Choose Rockwell 40-3/4 Inch Legs For Planned Layouts

The Rockwell table leg set chrome, with its 3 inch diameter legs, 40-3/4 inch height, and 1 1/8 inch adjustable foot, gives installers a defined support package for repeated table, counter, and bar-height projects. The 4 9/16 inch square mounting plate and clearly identified 976-40-C1 part number support standardized layouts, predictable drilling patterns, and consistent finished heights across multiple jobs. Select this Rockwell leg set when a known leg height with built-in adjustment and a chrome finish aligns with your work surface design and installation workflow.