3" Diameter x 40-3/4" High Rockwell Table Leg Set, Brushed Steel, 4/Set

Rockwell Table Leg Set For Stable Work Surfaces

Rockwell table leg set describes a set of 3 inch diameter x 40-3/4 inch high legs that support work surfaces and tables where a consistent bar-height structure is needed. The brushed steel finish provides a clean, professional look that fits commercial or shop environments where appearance and durability both matter. The legs are sold under manufacturer part number 976-40-ST, so matching this number keeps replacement or additional installations consistent across a project. The set is classified in the Work Surface & Tables and Table Legs categories, which points it directly to applications where freestanding or panel-supported tops require defined support points. The product is branded by Peter Meier, Inc., giving installers one recognizable reference when they need to coordinate with other components from the same manufacturer.

Key Rockwell Table Leg Set Details On The Job

• The 3 inch diameter legs spread load over a larger footprint, which supports heavier work surfaces or tables while reducing point pressure on the floor during everyday use.
• The 40-3/4 inch height sets the work surface or table at a bar-oriented level, which helps maintain a consistent working or serving height across multiple stations in the same room.
• The table, counter, and bar heights available in the Rockwell line allow projects to use matching legs across different elevations, which keeps visual lines uniform from one work area to the next.
• The 1 1/8 inch adjustable foot at the bottom of each leg allows small height corrections, which helps compensate for minor floor variations and improves stability without altering the top.
• The 4 9/16 inch (116mm) square mounting plate at the top provides a broad attachment zone, which spreads fastening forces and supports a more rigid connection between leg and work surface.

Mounting And Adjustment Details For These Legs

The 4 9/16 inch (116mm) square mounting plate creates a stable interface between the leg and the underside of the top, which helps resist racking when the table or work surface is pushed from the side. The plate geometry gives fabricators a clear reference area for planning their mounting layout, which streamlines drilling and layout steps during shop preparation. The 1 1/8 inch adjustable foot built into the leg allows small height changes without cutting the leg, which is useful when leveling a run of bar-height tops along a slightly uneven floor. That adjustment feature supports fine-tuning after the top is set, which can reduce rework when aligning neighboring cabinets, panels, or fixed structures.

Using Rockwell Table Leg Set In Real Projects

Where This Brushed Steel Table Leg Set Fits

The position of this product in the Work Surface & Tables category identifies it as a solution for supporting tops in work areas, bars, or other table applications where independent legs are preferred. The 40-3/4 inch high dimension matches a bar-height configuration, which suits tall counters where people stand or use high stools. Its 3 inch diameter profile provides a substantial visual presence, which aligns well with thicker tops or larger surfaces that benefit from a more robust leg look. The brushed steel finish integrates into commercial interiors, shop environments, or contemporary residential spaces where metal support elements are common around cabinets, counters, and workbenches. Being part of the Rockwell line gives designers and installers a coordinated reference when combining multiple tables or work surfaces in one project. The Peter Meier, Inc. branding ties this leg set to a manufacturer known within the table legs and support hardware segment, which helps standardize product selection across job phases.

Details That Support Consistent Height And Alignment

The 40-3/4 inch leg height establishes a predictable distance from floor to underside of the top, which is critical when aligning bar-height surfaces with adjacent casework or fixed partitions. The 1 1/8 inch adjustable foot extends the functional range of that height, which helps installers tune the final top elevation without trimming metal. This adjustability improves workflow on floors that vary slightly in level, because the leg can be fine-tuned after the top, panels, or brackets are already in place. The 4 9/16 inch (116mm) square mounting plate offers ample coverage under the top, which distributes forces during loading, movement, or cleaning and supports long-term joint stability. The 3 inch diameter tube geometry contributes to lateral stiffness, which helps the assembly resist wobble when the surface is used in active environments like bars or shop workstations. The classification as table legs within the Work Surface & Tables group clarifies that these components are intended as primary structural supports, which helps planners allocate leg count and placement logically under each surface.

Common Questions About Rockwell Bar-Height Legs

Selecting This Set For Bar-Height Work Surfaces

The 3 inch diameter x 40-3/4 inch high Rockwell table leg set in brushed steel offers a defined bar-height solution for work surfaces and tables. The 1 1/8 inch adjustable foot and 4 9/16 inch square mounting plate work together to support stable, level tops in active environments. With its placement in the Work Surface & Tables table legs category and clear manufacturer reference 976-40-ST, this Peter Meier, Inc. set provides a straightforward choice when a project calls for consistent, metal bar-height leg supports.