Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3 inch diameter 40-3/4 inch table leg from Peter Meier, Inc. gives a single-leg support option for work surfaces and tables where a fixed height around 40-3/4 inches is needed. The Rockwell single table leg format focuses support into one point, which suits peninsulas, overhangs, or open ends where cabinetry is not present under the top. The aluminum silver finish defines the look, which matters whenever the leg remains visible under counters or elevated worktops. As a table leg within the Work Surface & Tables category, it is intended to carry work surfaces in a straightforward, structural role rather than decorative trim. Being sold as each lets projects use exactly the number of legs needed for a layout, which fits custom runs, islands, or replacement on an existing installation where only one support point is being changed.
This Rockwell single table leg uses a 4 9/16 inch (116mm) square mounting plate, so the connection to the underside of the work surface is concentrated into a defined square footprint. That shape helps installers orient the leg consistently along cabinet lines or panel edges. The 1 1/8 inch adjustable foot adds a vertical tuning range at the floor contact point, which allows the leg to bring a work surface into plane when floors vary slightly from spot to spot. The 3 inch diameter shaft between plate and foot keeps the load path straight, which matters when aligning multiple legs so that each contact point shares load instead of leaving one leg hanging or overloaded.
The Rockwell single table leg format is aimed at work surface and table applications listed under Work Surface & Tables | Table Legs, so it suits layouts where a structural post is required rather than casework. The 40-3/4 inch height positions it for use on taller work surfaces that need leg support at that elevation, which matches counter or bar conditions described as table, counter and bar heights available. In situations where a designer wants open space under one end of a surface, the single-leg layout lets that end stay clear except for the leg itself. The aluminum silver finish supports projects using other silver-toned components, so the visual line under the surface remains consistent from one support point to the next.
The 1 1/8 inch adjustable foot is central to fine-tuning this leg, because that range lets installers dial in final height without cutting the leg or shimming the top. When used in multiples, that same adjustment range across each leg helps synchronize heights so the work surface sits flat from end to end. The 4 9/16 inch (116mm) square mounting plate defines a fixed bolt pattern area under the top, which simplifies drilling or layout jigs when many legs are used in a line. The 3 inch diameter column between plate and foot keeps measurement references straightforward, because that consistent diameter can be measured from adjacent panels or edges to repeat placements. Being identified by Manufacturer Part # 976-1S-71 ties this specific combination of height, diameter, finish, and adjustment together, which matters whenever the same leg must be matched later on additional runs or service work.
The leg is 40-3/4 inches high, so it sets work surfaces at that elevation and aligns with counter or bar height layouts that use this dimension as their working level.
The mounting plate is 4 9/16 inches square, or 116mm, giving a defined footprint that spreads load and provides a clear template area under the top.
The foot is 1 1/8 inches adjustable, so the installer can raise or lower the contact point to level the surface on floors that are not perfectly even.
The leg has a 3 inch diameter, which offers a broader support column that helps handle work surface loads without concentrating stress on a small post.
The table leg is aluminum silver, giving a metallic appearance that coordinates with other silver-toned components in work surface or table installations.
The leg is listed under Work Surface & Tables in the Table Legs product class, so it is intended as structural support for tops rather than decorative trim.
The Peter Meier, Inc. Rockwell leg with 3 inch diameter, 40-3/4 inch height, and aluminum silver finish gives a defined support solution when a single post is needed. With its 4 9/16 inch square mounting plate and 1 1/8 inch adjustable foot, it provides a repeatable way to secure and level a work surface or table at that height. For projects where structural support, height alignment, and a consistent metallic look are all required at a single point, this 976-1S-71 table leg offers a clearly specified option ready to integrate into the layout.
Sold In: 1 Each
