Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rockwell single table leg gives you a 40-3/4 inch high support built around a 3 inch diameter post, so you get a substantial leg that carries work surface and table loads with a stable footprint for shop, office, or commercial layouts. The stainless steel construction provides a corrosion-resistant surface that suits woodworking shops and other interior environments where metal legs see regular use and contact. The leg is designed as a single support element, which works well when you are laying out peninsula tops, stand-alone tables, or additional support points under longer counters. Table, counter, and bar heights are available in this Rockwell line, giving you a consistent look when you need multiple heights across one project. The 1-1/8 inch adjustable foot built into the leg allows fine height tuning, which is useful when leveling across uneven floors.
This Rockwell single table leg uses a 4-9/16 inch square mounting plate at the top, giving a clear, square layout when attaching it under a work surface or table top. The square plate geometry makes it straightforward to keep the leg oriented correctly along edges or corners of a top so alignments stay consistent. The built-in 1-1/8 inch adjustable foot at the bottom provides vertical adjustment after the leg is fixed, letting you fine-tune overall height against flooring variations or to match adjacent cabinetry or supports. Because the leg stands 40-3/4 inches high before adjustment, it fits bar-height and similar tall applications while still offering some play for precise leveling along the full run.
The Rockwell single table leg, at 40-3/4 inches high, lines up naturally with bar height counters and tall work surfaces, so it suits raised reception counters, bar-style tops, and high work tables that follow that dimension. Its role as a single leg makes it a good choice at open ends of tops or as intermediate support for longer surfaces where cabinetry does not run the full span. The stainless steel finish presents a clean look that pairs with contemporary laminate, solid surface, or wood tops, so one part number can serve across different design schemes while keeping a consistent structural component. The 3 inch diameter profile gives a visually substantial support, which can help match heavier-looking tops while still tying into a neat, engineered appearance.
The 4-9/16 inch square mounting plate lets installers plan leg locations with predictable clearances around corners and edges, which is useful in tight layouts where knee room and edge distances matter. Because the same plate size applies wherever the leg is used, layout patterns can repeat from station to station, supporting efficient production work when building multiple identical tables or counters. The stainless steel material also responds well to standard cleaning routines in commercial spaces, so the leg can be specified in environments where surfaces are wiped regularly without worrying about typical interior moisture exposure.
The combination of a 40-3/4 inch fixed height and a 1-1/8 inch adjustable foot means installers can work from a known nominal bar height and then fine-tune during final set, which streamlines framing and cabinet setting ahead of leg installation. The 3 inch diameter post offers enough section size to feel rigid under side loads common at bar overhangs or workstation edges, which reduces movement that can otherwise lead to callbacks about wobble. By using a 4-9/16 inch square mounting plate, the leg provides a generous contact area for fasteners into the underside of the top, which helps distribute stress from people leaning or equipment resting on the surface.
The stainless steel construction not only resists corrosion but also keeps finish damage from minor impacts lower in visibility, so legs continue to present well in high-traffic zones. Because table, counter, and bar heights are available in the same Rockwell family, shops can standardize on one style across a project, simplifying ordering and planning while still matching each height requirement. The adjustable foot at the base gives that final leveling capability that can save time during punch-out, since installers can bring multiple legs and cabinets into plane without rebuilding substrates. Overall, the specific height, diameter, mounting plate size, and adjustment range work together to help deliver predictable alignment, reduced field modification, and consistent results from one installation to the next.
The Rockwell single table leg stands 40-3/4 inches high with a 3 inch diameter post, giving a tall, substantial support suited to bar-height and similar elevated work surface applications.
The Rockwell leg uses a 1-1/8 inch adjustable foot, allowing installers to fine-tune finished height and correct for floor variations without altering the work surface or substructure.
The Rockwell single table leg is stainless steel, which resists corrosion and supports long-term appearance in interior environments where legs are exposed to regular use and cleaning.
The Rockwell leg uses a 4-9/16 inch square mounting plate, which spreads load into the underside of the top and gives a clear, square layout reference for installing the leg.
The Rockwell single table leg is 40-3/4 inches high, aligning with typical bar height and tall counter projects where elevated work or eating surfaces are required.
The Peter Meier 976-1S-SS designation identifies this specific Rockwell single stainless steel leg configuration, helping align ordering with the required size and style on repeat projects.
The 3 inch diameter x 40-3/4 inch high Rockwell single table leg in stainless steel brings together tall bar-height sizing, a 4-9/16 inch square mounting plate, and a 1-1/8 inch adjustable foot to support stable, level work surfaces. The stainless construction and defined dimensions let you plan bar counters, tall workstations, or reception runs around a known support component. For projects calling for table, counter, or bar heights within one Rockwell family, this Peter Meier 976-1S-SS leg gives a consistent structural and visual foundation for your layouts.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  CM976-DECO-SS Mfr# 976-DECO-SS | 3" Diameter Decorative Foot, Stainless Steel |
