Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the right-hand drawer side profile from Blum's TANDEMBOX system — a 400mm (16 inch) steel member that forms the structural wall of the drawer and integrates the running gear. It is sold as a single right-hand piece; a complete drawer requires both the right-hand and left-hand drawer members, each ordered separately.
The 400mm nominal length suits cabinet boxes in the 400 to 450mm depth range — a common dimension in base cabinet and tall cabinet drawer runs. At 84mm (3-5/16 inches) tall, this profile is a mid-height side, appropriate for cutlery drawers, utility drawers, and shallow storage pulls where a lower profile keeps the drawer proportional to the front. Shops building multi-drawer towers or cabinet runs that mix painted interiors with gray hardware will find the Gray finish easier to match than bare steel or bright white. Because the profile is right-hand only, it is also useful as a replacement member when only one side of a working drawer needs to be swapped out.
The profile is formed steel in Blum's Gray finish — a factory-applied color that holds up to the daily friction of a production kitchen or shop environment. The Gray reads as a warm neutral in most painted cabinet interiors and coordinates with the Gray TANDEMBOX rear wall and steel back panel options in the same program. It is an interior component, so it is not specified for moisture-heavy or exterior environments.
Cabinet shops building TANDEMBOX drawer runs to a stock depth of 400mm reach for this profile when the project calls for a Gray interior rather than white or a metallic finish. Designers specifying handle-less kitchens with ORGA-LINE interiors often select Gray to sit behind stainless steel trays without a color clash. Renovation contractors replacing a damaged member on an existing TANDEMBOX installation can source this right-hand profile individually rather than replacing the whole drawer set. Homeowners who want to complete a TANDEMBOX retrofit or add a drawer to a Blum-equipped cabinet can order a matched pair — right-hand here, left-hand separately — and add the other system components to suit.
Single piece — right-hand only. One drawer needs one right-hand member and one left-hand member, each ordered as its own SKU.
Nominal length is the system designation, not the interior drawer depth. Your cabinet needs sufficient depth to accept the 400mm system, and all your TANDEMBOX components — runners, rear wall holders, and this profile — must share the same nominal length.
ORGA-LINE is the organization line for TANDEMBOX drawers, so yes — build the drawer box on this profile and the 400mm nominal length ORGA-LINE trays and dividers will fit inside it. AMBIA-LINE inserts are for LEGRABOX and will not interchange.
No. TANDEMBOX profiles are engineered for Blum's TANDEMBOX runner system. Mixing with runners from other brands or other Blum series will not produce a working, warranted drawer.
84mm is approximately 3-5/16 inches — a mid-range side height in the TANDEMBOX program, suitable for cutlery and utility drawers. If you need a taller side for pot drawers or deep storage, check the other TANDEMBOX side height options.
Pair this right-hand Gray TANDEMBOX profile with its left-hand counterpart, the matching 400mm runners, and your front fixings, and the drawer box comes together as one coordinated Blum system — built to the depth, height, and finish the job requires.
Sold In: 1 Each