Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a 24-inch TANDEMBOX drawer member in Gray steel, sold as a left-hand and right-hand pair, and engineered to work with Blum's TANDEMBOX drawer system with integrated BLUMOTION soft-close. It is the drawer-side profile — the structural component the drawer box is built around — not a complete drawer kit.
The 24-inch nominal length targets standard base cabinets where a full 24-inch depth is specified. The 84mm side height keeps these profiles at home in top drawers — flatware pulls, cutlery, and shallow utility storage — where a taller box would crowd the drawer above. Full extension means the entire drawer clears the cabinet face, so even a shallow box delivers access all the way to the back. The BLUMOTION damper works regardless of load, settling a half-filled cutlery tray as quietly as a fully loaded utensil drawer.
Because these are drawer member profiles, not a complete system set, they pair with the rest of the TANDEMBOX platform: bottom panels, front fixing brackets, back panels, and locking devices all come from the same system and must be specified separately. In face-frame cabinet installations, rear mounting brackets are also required and are sold separately.
The profiles are formed steel finished in Gray — a neutral mid-tone that sits quietly behind most drawer fronts and interior accessories. The Gray finish coordinates with Gray-finish TANDEMBOX locking devices and front fixings from the same platform, keeping the assembled drawer interior consistent. Where the interior will be visible — glass fronts, open-face applications — the Gray reads as a clean, low-contrast backdrop rather than a stark accent.
Steel construction at this profile height carries the 100 lb per-pair rating through everyday kitchen and shop loads without flex. The rating is dynamic; confirm any static-only ratings against Blum's published data if the application involves sustained loaded storage.
Cabinet shops building TANDEMBOX interiors in volume will find the Gray finish useful across a wide range of projects — it is a neutral that neither clashes with light interiors nor disappears into dark ones. Designers specifying a handle-less kitchen can pair these profiles with TIP-ON BLUMOTION mechanical push-to-open units to keep the front clean; the BLUMOTION damping is already in the runner, so no separate soft-close add-on is needed. For homeowners completing a single cabinet run, the pair format means both sides arrive together and the box can be built to spec in one order — no hunting for a matching left- or right-hand member separately.
These profiles suit frameless cabinet construction directly. For face-frame cabinetry, rear mounting brackets specific to the TANDEMBOX system are required — pick those up at the same time to avoid a second shipment.
Just the side profiles. A complete TANDEMBOX drawer requires bottom panels, front fixing brackets, back panels, and locking devices, all ordered separately from the TANDEMBOX system.
The side profile stands 84mm (about 3-5/16 inches) tall. This is a low-profile height suited to shallow drawers — cutlery pulls and top utility drawers — not deep pot or pantry drawers. Match the height to the drawer's intended use before ordering.
Yes. This SKU ships as a left-hand and right-hand pair — both members needed to build one drawer.
Yes, but face-frame installation requires TANDEMBOX-specific rear mounting brackets that are sold separately. Frameless cabinets mount directly to the side wall on the 32mm grid without additional brackets.
ORGA-LINE is Blum's organization line for TANDEMBOX drawers, so yes — ORGA-LINE cutlery trays, utensil inserts, and cross dividers are designed to work inside TANDEMBOX boxes built on these profiles. Choose ORGA-LINE components sized to the drawer's interior width.
Specifying the correct nominal length, side height, and finish before ordering is what keeps the project on schedule. These 24-inch Gray TANDEMBOX drawer members cover the structural core of one drawer — add the system's locking devices, front fixings, and rear brackets if needed, and the box goes together as Blum engineered it.
Sold In: 1 Set
