Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This 500mm right-hand drawer profile is a TANDEMBOX system side member, sized for 20-inch nominal-length drawer installations and finished in Gray to coordinate with Blum's TANDEMBOX interior palette. It is a single right-hand profile sold as one piece; order the matching left-hand profile to form a complete working pair.
The 500mm nominal length targets the most common mid-depth cabinet run in kitchen and bath cabinetry. At 84mm tall, the profile suits drawers carrying everyday loads — flatware trays, spice inserts, folded linens, or light pantry goods — without adding unnecessary bulk. Full-extension travel means the entire drawer box clears the cabinet face, so nothing hides at the back. On production lines where a crew is loading drawers to a repeating 500mm spec, ordering the right-hand and left-hand profiles in matching quantities keeps the build moving without mismatched pairs slowing assembly.
Gray is a neutral, low-reflectance finish that works behind painted fronts, laminate interiors, and natural wood cases without pulling visual attention. It sits within Blum's TANDEMBOX color program, so it reads consistent alongside other Gray TANDEMBOX components on the same project. Steel construction gives the profile the structural rigidity the TANDEMBOX system is built around, and the factory-applied finish is uniform enough that interior visibility through an open drawer stays clean and professional. For projects specifying a lighter or richer interior finish, Blum offers TANDEMBOX profiles in additional colors — but for builds where the interior recedes, Gray does its job without distraction.
Cabinet shops building kitchens or baths to a 500mm drawer depth reach for this profile as a standard component. Designers specifying TANDEMBOX on a full kitchen project typically land on the 500mm length for upper base cabinets and select taller or shorter nominal lengths for specialty drawers. Contractors doing installs on pre-built TANDEMBOX cases need the exact profile to replace a damaged member or complete a short-shipped set — and the right-hand orientation must match the side of the box it goes on. Homeowners replacing a single profile on an existing TANDEMBOX build should confirm the 500mm nominal length and the Gray finish match their current system before ordering.
One side only — this is the right-hand profile. You need one right-hand and one left-hand profile to build a single drawer, plus the system's back panel, front fixing brackets, and a runner set. None of those are included with this profile.
The runner channel and attachment geometry are handed — a right-hand profile mounts on the right side of the drawer box as viewed from the front. Installing two right-hand profiles gives you a non-functional pair. Order one right and one left for each drawer.
This profile is part of the TANDEMBOX system. TANDEMBOX components are not interchangeable with LEGRABOX, MERIVOBOX, or METABOX platforms. Use TANDEMBOX-matched parts throughout any one drawer build.
The usable interior width depends on the cabinet opening and the TANDEMBOX cutting formula for the nominal length and box type you are building. Refer to Blum's published cutting dimensions for the 500mm TANDEMBOX system to calculate your box width before cutting.
Yes. ORGA-LINE is Blum's interior organization line for TANDEMBOX drawers, and it pairs with this system. Select ORGA-LINE trays to match your drawer's interior dimensions once the box is assembled.
One right-hand Gray TANDEMBOX profile at 500mm — pair it with its left-hand counterpart, the system back, front fixings, and runners to complete the drawer and keep the project on schedule.
Sold In: 1 Each