3" Air Vent Grommet Cap Set for 2-1/2" Hole, Putty
Description
3 Inch Air Vent Grommet Cap Set For Clean Vents
3 inch air vent grommet cap set describes a plastic vent trim set designed to finish a 2-1/2 inch hole, so the cutout edge is covered and air openings look clean and deliberate on finished work. The set uses a liner and cap together, which creates a defined vent opening that looks consistent across multiple panels or cabinets. The putty color provides a neutral appearance, allowing the vent to blend into many light surfaces in closets, shelves, or workspace panels. The plastic construction keeps the parts light, so they sit comfortably in the bore without adding stress to the panel material. The 2-1/2 inch bore sizing gives installers a clear drill or hole-saw target, which supports predictable layout when repeating vents across a run of cabinets or partitions.
Key Air Vent Grommet Details That Matter
- The 3 inch air vent grommet cap set is sized around a 2-1/2 inch hole, giving a clear dimension for drilling so repeated vents line up cleanly along shelving, closets, or workspace panels.
- The set uses a dedicated liner and cap, so the liner defines the bore edge while the cap finishes the visible face, helping installers create a tidy vent detail on both sides of the panel.
- The plastic construction keeps the grommet light and stable, which helps it sit securely in typical wood or composite panels used in shelving, closets, or multimedia workstations.
- The putty color offers a muted, neutral tone, letting the vent detail sit back visually on many light-colored surfaces while still providing an intentional finished edge.
- The Doug Mockett and Company, Inc. EDPAVG3-93 part number identifies this exact liner and cap combination, supporting repeat orders when matching an existing vent detail on future projects.
Vent Grommet Fit And Bore Setup Details
This air vent grommet uses a 2-1/2 inch bore as its primary fit dimension, giving installers a specific target when selecting a hole saw or boring setup for panels. The grommet is part of a 3 inch air vent grommet cap set, so the visible diameter is larger than the bore, allowing the cap to cover the cut edge for a finished appearance. The liner portion of the set occupies the bore, which helps stabilize the vent opening inside the panel material. Because the grommet is plastic, it works well with typical woodworking tools, supporting a smooth edge transition between the drilled hole and the finished vent trim.
Using This Vent Grommet Set In Projects
Where This Plastic Vent Grommet Works Best
This product is categorized under shelf, closet and garage organization, multimedia and workspace components, and grommets, placing it in projects where airflow and finished openings matter in built-in storage or work areas. The 3 inch air vent grommet cap set design suits vertical or horizontal panels where a 2-1/2 inch hole can be bored, such as cabinet sides, closet partitions, or desktop modesty panels. The putty color supports use on light-toned shelving and closets, allowing vents to appear intentional rather than like raw cutouts. As a grommet in the multimedia and workspace components category, it also aligns with workstation panels where equipment or enclosed spaces benefit from ventilated openings.
Details That Support Repeatable Vent Layouts
The defined 2-1/2 inch bore for this air vent grommet cap for 2-1/2 inch hole gives a fixed drilling dimension, which is useful when laying out multiple vents along a run and wanting consistent spacing and appearance. The liner and cap structure simplifies finishing, since the liner addresses the internal bore while the cap addresses the visible face, reducing the need for additional edge treatment on the cutout. The plastic material works predictably with common woodworking bits, helping maintain a clean interface between the panel and the grommet. Using the EDPAVG3-93 manufacturer part number through Wurth Baer Supply ties future work back to the same 3 inch air vent grommet cap set, supporting consistent visual results across new cabinets or expansions to an existing installation.
Common Questions About This Air Vent Grommet
What hole size does this vent grommet require?
This air vent grommet is designed for a 2-1/2 inch bore, so that hole size sets the fit and helps installers align drilling operations with the finished vent layout.
What is the overall vent grommet style and purpose?
This is a 3 inch air vent grommet cap set made to trim a vent opening, so it finishes the cut edge and defines an intentional air passage in panels or cabinets.
How does the liner and cap design help on the job?
The vent grommet uses a liner and cap, so the liner stabilizes the bore while the cap cleans up the face, reducing finishing steps around the drilled opening.
What material is this air vent grommet made from?
This air vent grommet is made of plastic, which works well with typical woodworking tools and panel materials during drilling and installation.
How does the putty color affect visible installations?
The putty finish gives a neutral, light tone, helping vents blend into light-colored shelving, closets, or workspace panels while still presenting a finished edge.
Why is the EDPAVG3-93 part number important?
The EDPAVG3-93 part number identifies this exact Doug Mockett vent grommet set, supporting consistent reordering when expanding or matching existing installations.
Selecting This Vent Grommet For Your Next Build
The 3 inch air vent grommet cap set for 2-1/2 inch hole, putty, from Doug Mockett and Company, Inc., offers a defined liner and cap design that finishes vent cutouts cleanly. The 2-1/2 inch bore specification gives a clear drilling target for repeatable layouts. The plastic construction and neutral putty color support a wide range of shelf, closet, garage, multimedia, and workspace projects. For work that needs a consistent, finished air vent opening, this EDPAVG3-93 grommet set aligns well with typical woodworking panel builds.