2 inch bore plastic grommet describes a Bainbridge Manufacturing liner and cap set designed for a 2 inch diameter hole at typical work surfaces. The plastic construction forms a smooth edge around the bore, which helps protect cables as they pass through wood or laminate panels in desks, cabinets, or workspace furniture. The matching cap fits into the liner, creating a finished black appearance that blends with many multimedia and workspace components. With a specified 5/8 inch depth, the grommet is sized for common panel thicknesses in shelving, closet, and garage organization projects, so installers can route wiring while keeping the hole properly lined. The black finish gives the opening a consistent, professional look wherever a 2 inch bore is used for cable or hose pass-throughs.
This Bainbridge Manufacturing grommet is specified for a 2 inch diameter bore, so installers can size their hole saw or bit to that dimension and know the liner is intended to seat in that opening. The 5/8 inch depth sets the liner engagement into the panel, which helps when selecting materials and planning where cables pass through. Because it is a liner and cap combination in black finish, the installed fit presents a continuous edge and top surface around the bore, which keeps the cutout visually controlled while providing a defined route for wiring in workspace, closet, or garage organization projects.
The Bainbridge Manufacturing 1035BK-32 grommet is part of a multimedia and workspace components category, so it is suited to work surfaces where cords need to pass through a 2 inch bore. The plastic liner defines the inner wall of the hole, which can help protect cable jackets from the edges of drilled openings in desks, counters, or cabinets. Its 5/8 inch depth interacts with panel thickness, meaning the liner occupies a defined section of the board without extending excessively. The cap sits at the surface of the 2 inch bore, presenting a clean black ring that visually finishes the cutout. In shelf or closet layouts, this same configuration lets installers route low-voltage lines through panels while keeping the opening controlled and matching other black hardware.
The defined 2 inch bore requirement on this grommet allows fabricators to standardize drilling operations using a single hole size across multiple tops or panels. With the 5/8 inch depth known, shop drawings can account for how much of the grommet occupies the panel thickness, which simplifies planning for stacked materials or backing components. The black plastic liner and cap present a predictable visual target on each finished surface, aiding consistent layout when multiple pass-throughs are needed on the same work area. Because the product is identified as Bainbridge Manufacturing 1035BK-32 within a grommets product class, specifying the same part number across orders supports uniform results on repeated builds or multi-room installations.
The Bainbridge Manufacturing 1035BK-32 grommet is described for a 2 inch diameter bore, so its liner and cap are intended to fit an opening drilled to that size in the work surface.
This grommet has a 5/8 inch depth, meaning the liner extends that distance into the bore, which affects how it occupies the thickness of the panel or top.
The 2 inch bore grommet is made of plastic, providing a smooth interior edge that helps guide and protect cables passing through drilled wood or composite openings.
The black finish gives the liner and cap a uniform appearance, helping the cable opening blend with dark desks, cabinets, or equipment in multimedia or office settings.
This product sits within shelving, closet, garage organization, and multimedia workspace components, so it serves where a 2 inch bore is needed for cable pass-through.
The 1035BK-32 part number ties directly to this specific black 2 inch bore plastic grommet, helping installers repeat the same component across similar projects.
The Bainbridge Manufacturing 1035BK-32 grommet combines a 2 inch diameter bore design, 5/8 inch depth, and black plastic liner and cap to organize cable pass-throughs in desks, cabinets, and storage systems. When a project calls for a defined 2 inch opening within shelving, closet, garage, or multimedia layouts, this grommet supplies a consistent edge and finished look. For jobs that repeat the same cutout size across multiple panels, standardizing on this part number supports uniform drilling, routing, and visual alignment from one work surface to the next.