1-1/2 inch grommet liner cap from Bainbridge Manufacturing is a plastic grommet designed to finish a 1-1/2 inch diameter bore at a depth of 5/8 inch in wood or similar panels. The liner dimension matches a 1-1/2 inch diameter bore, so the edge of the drilled hole is covered for a more finished opening around wires or small components. The 5/8 inch depth gives the bore a defined sleeve, which helps protect the bore wall from direct contact with cables during everyday use. The white finish provides a neutral look that blends into light-colored surfaces in office furniture, closets, or workstations where a bright, clean opening is preferred. As a Bainbridge Manufacturing part, identified as 1037WH-32, this grommet fits into hardware schedules or plans that call out that specific manufacturer number.
This Bainbridge plastic grommet is sized for a 1-1/2 inch diameter bore, so drilling that hole size creates the opening this part is intended to line. The 5/8 inch depth of the liner means the bore should be at least that deep in the panel to take advantage of the full sleeve length, giving the side of the hole a plastic wall rather than exposed panel material. The white finish is applied to the visible portions of the liner and cap area, which keeps the perimeter of the bore visually consistent with light-colored surfaces where this grommet is typically used around desks, workstations, or storage panels.
This Bainbridge Manufacturing 1037WH-32 grommet belongs to the multimedia and workspace components category, so it fits naturally wherever cables or small leads pass through furniture or panels. The 1-1/2 inch diameter bore specification aligns with a compact opening, which is useful in desktops, modesty panels, or equipment cabinets that only need a modest cable cluster. The 5/8 inch depth of the bore coverage works well in many common panel thicknesses used in closets or garage organization layouts, giving enough side engagement to visually frame the opening. The white finish coordinates with white laminate, melamine, or painted casework, supporting a uniform look in storage systems and office furniture that rely on light-colored components.
The clearly stated 1-1/2 inch diameter bore gives installers a single target hole size, which simplifies layout and drilling when the same opening is repeated across multiple panels. With a defined 5/8 inch depth, the grommet provides consistent wall coverage inside each bore, so finished openings look and behave the same from panel to panel. The plastic material responds predictably when seated into a correctly sized bore, offering a uniform edge around cables across an entire bank of desks or closet sections. The manufacturer part number 1037WH-32 ties into Bainbridge Manufacturing documentation, helping shops keep the same grommet in production runs or service work where matching the existing white finish and opening size is important. Being part of the grommets product class also keeps this piece aligned with other cable and opening management details commonly specified on woodworking jobs.
The Bainbridge 1037WH-32 grommet is made for a 1-1/2 inch diameter bore, so holes drilled to that size will match the liner dimensions and produce a snug, finished opening.
The grommet liner has a 5/8 inch depth, giving measurable sidewall coverage in the bore so the drilled edge is lined by plastic rather than the panel core.
This 1-1/2 inch bore grommet is made of plastic, providing a lightweight, non-metallic edge around the opening that is suitable for multimedia and workspace components.
The Bainbridge plastic grommet has a white finish, so it visually aligns with white or light-colored cabinetry, closets, or work surfaces where a bright opening edge is preferred.
This part is classified in the grommets product class and listed under multimedia and workspace components, locating it with other cable and opening management pieces in planning documents.
The part number 1037WH-32 identifies this specific Bainbridge Manufacturing white plastic grommet, helping match exact size and finish when reordering or aligning with drawings.
The 1-1/2 inch grommet liner cap from Bainbridge Manufacturing gives a defined plastic edge to a 1-1/2 inch diameter bore at 5/8 inch depth, turning a drilled opening into a controlled pass-through for cables. The white plastic finish supports light-colored multimedia, workspace, closet, or garage organization layouts, so the opening reads as part of the planned hardware rather than a rough cutout. With a clearly identified manufacturer part number, 1037WH-32, this grommet can be specified whenever the project calls for a compact, white finished bore in desks, panels, or storage components.