Grommet, 3" Diameter Bore x 5/8" Depth Almond Finish - Bainbridge Manufacturing 1043AL-32

3 Inch Bore Almond Grommet For Work Surfaces

3 inch bore almond grommet describes a plastic liner and cap set designed to finish a 3 inch diameter hole in desks, counters, or other work surfaces, so the opening looks clean and professional instead of like a raw cutout. The Bainbridge Manufacturing 1043AL-32 part uses a plastic construction, which keeps edges smooth around the bore and helps protect cables or other items passing through from abrasion during daily use. The 5/8 inch depth specification means the liner seats into standard-thickness tops without projecting excessively below, which helps when clearances under the surface are tight. The almond finish provides a neutral, light-toned look, which blends well with many laminated or painted surfaces in offices, closets, or shop furniture where a darker grommet could stand out visually.

Key Plastic Grommet Details For Daily Use

• The 3 inch diameter bore sizing lets installers match this grommet to a known hole saw size, which simplifies layout on work surfaces and reduces rework from mis-sized openings.
• The 5/8 inch depth of the liner keeps the grommet seated securely in the cutout, which supports stable cable passthrough and helps the edge stay aligned over time.
• The almond finish gives a light, neutral appearance that coordinates with many standard work surface colors, which helps maintain a consistent look across multiple stations.
• The plastic material allows the liner and cap to provide smooth contact around the hole edge, which helps protect cords or items moving through from sharp wood or laminate edges.
• The Bainbridge Manufacturing branding and 1043AL-32 part number give a clear reference for repeat orders, which simplifies matching parts across multiple projects or job phases.

Grommet Fit, Edge Depth, And Bore Alignment

The specified 3 inch diameter bore lets installers drill holes using that exact dimension so the plastic liner fits closely, which limits play in the opening and gives a tight, finished perimeter. The 5/8 inch depth of the grommet liner defines how far it extends into the hole, which helps align the visible cap with the surface plane and keeps the edge from rocking when worktops flex slightly in use. The almond finish works well where a lighter trim detail around the bore is preferred, which helps the grommet read as part of the top rather than as a contrasting insert in office or shop layouts.

Using This Almond Grommet In Real Projects

Where The 3 Inch Bore Grommet Works Best

This grommet, described as 3 inch diameter bore by 5/8 inch depth with almond finish, suits openings in desks, counters, and similar horizontal work surfaces where a clean cable or access point is needed. The plastic construction supports use in multimedia and workspace component layouts, matching its category placement, so it fits typical office, workstation, and shop furniture scenarios. The neutral almond color helps tie in with light laminates often used on commercial worktops, which supports a consistent look when multiple cutouts are spread across a run of cabinets or tables. The defined bore and depth measurements help installers standardize hole sizes across a project, so each work surface receives the same opening geometry.

Details That Support Repeatable Grommet Results

The 3 inch diameter bore specification provides a clear drilling target, which helps crews repeat the same layout across several tops without measuring each hole differently, saving time during installation. The 5/8 inch depth keeps the grommet occupying a predictable portion of the hole thickness, which aids in planning when tops share space with drawers or structural members below. The plastic liner and cap combination ensure the top edge and inner wall of the hole are both covered, which maintains a smooth transition around the cutout as cables slide through. The almond finish lets specifiers call out a specific color tone that stays consistent with the Bainbridge Manufacturing 1043AL-32 part number, which simplifies replacement or expansion work later when matching existing stations.

Common Questions About Bainbridge 1043AL-32 Grommet

Select This Almond Grommet For Sized Work Surfaces

The Bainbridge Manufacturing 1043AL-32 plastic grommet, described as a 3 inch diameter bore by 5/8 inch depth almond finish liner and cap, gives installers a defined sizing standard for clean work surface openings. The combination of plastic material, known bore, and controlled depth supports consistent cutouts across desks, counters, and multimedia work areas. For projects where a light-toned, neutral trim is preferred around access holes, this almond finish grommet aligns visual appearance with functional edge protection on every station.