
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
This Rev-A-Shelf SBDTF Series drip tray sits on the floor of an under-sink base cabinet to catch drips, slow leaks, and cleaning product spills before they reach the cabinet base.
Under-sink cabinets take the worst of everyday kitchen and bath use: slow drips from supply lines, condensation from pipes, and the occasional cleaning product spill. Left unprotected, a cabinet floor absorbs that moisture over time and breaks down. This tray creates a barrier between standing liquid and the cabinet base, so a slow leak stays on the tray instead of soaking into the wood. The raised perimeter keeps liquid contained until the tray is lifted out and rinsed. Because thermoplastic elastomer stays pliable, the tray lays flat against irregular cabinet floors and bends out of the way of supply lines and drain fittings rather than forcing a rigid gap.
Thermoplastic elastomer is the practical choice for a wet-area liner: it does not absorb water, it wipes clean, and it flexes without cracking or becoming brittle over time. The Gray finish reads as a neutral background in the cabinet interior, sitting back from the plumbing rather than drawing attention. At 34-1/2 inches wide and 23-1/4 inches deep, the tray covers the floor of a wide under-sink cabinet, and at 3/4 inch tall the raised walls contain a meaningful volume of liquid without raising the floor height enough to interfere with undersink organizers or pull-out systems placed on top.
This tray suits a wide under-sink base cabinet in a kitchen or a bath where supply-line drips, pipe condensation, or cleaning product spills are a regular concern. It is a practical liner for renovation work going into new construction, a useful upgrade to an older cabinet that has already seen moisture, and a good companion to an under-sink pull-out organizer where the tray sits below the organizer frame. Cabinet shops and contractors fitting out kitchens in volume will find the wide format covers most standard 36-inch sink base cabinets without trimming.
Yes. The tray is designed to work alongside Rev-A-Shelf under-sink systems and lies flat below the organizer frame. The 3/4 inch wall height does not significantly raise the floor for most slide-mounted units.
The thermoplastic elastomer material is flexible and can be cut or notched to work around supply lines, drain pipes, or cabinet supports as needed.
At 34-1/2 inches wide and 23-1/4 inches deep, this tray is sized for a standard 36-inch sink base cabinet. Measure the usable interior floor of the cabinet before ordering to confirm fit.
Yes. It lifts out of the cabinet, can be rinsed or wiped down, and goes back in place without fasteners or adhesive.
Choose this gray drip tray to protect a wide under-sink base cabinet from moisture damage, with a flexible fit that works around plumbing and coordinates with Rev-A-Shelf pull-out systems.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RSDPSBDTF2730-14-1 Mfr# SBDTF-2730-14-1 | Rev-A-Shelf SBDT Series Gray Drip Trays, 28-1/2"W x 23-1/4"D x 3/4"H, - SBDTF-2730-14-1 | ||||
Sold in: 1 Each | RSSBDTF-2730-14-1 Mfr# SBDTF-2730-14-1 | Rev-A-Shelf SBDT Series Gray Drip Trays, 28-1/2"W x 23-1/4"D x 3/4"H, - SBDTF-2730-14-1 | ||||
Sold in: 1 Each | RSSBDTF-3942-14-1 Mfr# SBDTF-3942-14-1 | Rev-A-Shelf SBDT Series Gray Drip Trays, 40-1/2"W x 23-1/4"D x 3/4"H, - SBDTF-3942-14-1 |