Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf SBDTF Series drip tray sits on the floor of an under-sink cabinet to catch drips, slow leaks, and cleaning-supply spills before they reach the cabinet base. At 40-1/2 inches wide, it covers the footprint of a broad single- or double-sink cabinet in a neutral gray finish that blends into most cabinet interiors.
An under-sink cabinet is where slow drips from supply lines, drain connections, and disposal units collect unnoticed. A drip tray at the cabinet floor intercepts that moisture before it soaks into the wood base and causes damage over time. This tray also catches spills from cleaning supplies stored below the sink, where a tipped bottle of dish soap or a leaking spray can spread across the entire cabinet floor before anyone notices. The raised lip around the perimeter keeps liquid contained long enough to be caught and cleaned up rather than absorbed.
The tray is molded from thermoplastic elastomer, a flexible rubber-like material that holds its shape under a load but bends rather than cracks when pressed against a pipe, a pull-out base, or a cabinet wall. Because it flexes, the tray seats flat even when cabinet floors are not perfectly level, and it can be maneuvered around existing plumbing during installation without tools. The gray color is a practical choice for an under-sink environment where the tray will be out of everyday view but visible when the cabinet door is open.
This tray is sized for a wide under-sink base cabinet, a common configuration in kitchens with a double basin or a single deep apron sink. It also suits utility cabinets under a laundry sink or a bar sink where cleaning products and soap dispensers are stored. Designers specifying under-sink organizer systems will find it pairs well with Rev-A-Shelf pull-out units in the same cabinet run. Homeowners doing a kitchen refresh can drop it into an existing cabinet without modification.
No cutting is required. The thermoplastic elastomer material flexes so the tray can be bent and pressed around drain pipes, supply lines, and disposal mounting hardware during installation.
The lip is 3/4 inch tall, which is enough to catch a slow drip or a modest cleaning-supply spill. It is not designed for high-volume leaks. If you see standing water in the tray regularly, that is a signal to check the plumbing connection.
The flexible material conforms to minor floor irregularities. For a cabinet with a center stile, measure the clear interior width on each side of the stile before ordering, since the tray spans the full 40-1/2 inch width.
Yes. The SBDTF Series is designed to complement Rev-A-Shelf under-sink organizer systems. Confirm the footprint of the pull-out unit against the tray's 40-1/2 inch width and 23-3/4 inch depth before combining them.
Drop this gray flexible drip tray into a wide under-sink cabinet to protect the cabinet floor from leaks and spills, with no cutting, no tools, and no modification required.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  RSDPSBDTF2730-14-1 Mfr# SBDTF-2730-14-1 | Rev-A-Shelf SBDT Series Gray Drip Trays, 28-1/2"W x 23-1/4"D x 3/4"H, - SBDTF-2730-14-1 | ||||
Sold in: 1 Each | RSSBDTF-2730-14-1 Mfr# SBDTF-2730-14-1 | Rev-A-Shelf SBDT Series Gray Drip Trays, 28-1/2"W x 23-1/4"D x 3/4"H, - SBDTF-2730-14-1 | ||||
Sold in: 1 Each |  RSDPSBDTF3336-14-1 Mfr# SBDTF-3336-14-1 | Rev-A-Shelf SBDT Series Gray Drip Trays, 34-1/2"W x 23-1/4"D x 3/4"H, - SBDTF-3336-14-1 | ||||
Sold in: 1 Each | RSSBDTF-3336-14-1 Mfr# SBDTF-3336-14-1 | Rev-A-Shelf SBDT Series Gray Drip Trays, 34-1/2"W x 23-1/4"D x 3/4"H, - SBDTF-3336-14-1 |
