Domi Snap-On 1-Cam Steel Mounting Plate with Euro Screw, Nickel-Plated, 3mm

Domi Snap-On Mounting Plate For Salice Hinges

Domi Snap-On 1-Cam Steel Mounting Plate gives you an economical clip on plate for Salice hinges Series F and Series B, so you can use one style of base plate across those hinge lines on your projects. The 3mm steel premounted euro baseplate builds in a consistent mounting height, which helps keep door reveals uniform from cabinet to cabinet. Nickel-plated, corrosion-resistant construction protects the plate in typical cabinet environments, so alignment settings stay stable over time. This hinge mounting plate uses a euro screw interface, which ties directly into standard system holes for efficient cabinet production work. The plate design supports a snap-on connection to the hinge, so doors can be hung and removed quickly during fitting, finishing, or service. A lifetime warranty from Salice America supports long-term use in repeat installations.

Key Mounting Plate Details That Save Time

• The economical clip on plate design reduces hardware cost per opening while still supporting Salice hinges Series F and Series B, which helps standardize your hinge program across multiple cabinet runs.
• Depth adjustment of -0.5 mm to +2.8 mm by eccentric cam lets you dial doors in and out after mounting, which helps correct small drilling tolerances and get clean reveals without reboring.
• Height adjustment of plus or minus 2 mm by slotted holes gives vertical play at the plate, so you can shift doors up or down on installed cabinets instead of remounting the carcass or hinge arm.
• Standard 37 mm x 32 mm positioning matches common system boring layouts, which supports fast jig-based drilling and helps you keep hole patterns consistent across production and field work.
• Nickel-plated, corrosion-resistant steel construction keeps the plate surface protected, which helps the cam and screw adjustments operate smoothly during installation and later touchups.

Hinge Mounting Adjustments For Clean Reveals

This Salice hinge mounting plate uses depth adjustment of -0.5 mm to +2.8 mm by eccentric cam, giving you fine control of the door in and out from the cabinet face. That range lets you tune overlay and close gaps after the case and door are already built. Height adjustment of plus or minus 2 mm by slotted holes adds vertical flexibility at the plate, so you can shift a door slightly to align with neighbors without changing the hinge arm. Standard 37 mm x 32 mm positioning ties these adjustments to a familiar boring pattern, which supports quick layout with line-boring equipment or templates. Together, these functions keep final fitting work focused at the plate instead of reworking the cabinet.

Using This 3mm Steel Euro Baseplate In Work

Where This Salice Hinge Mounting Plate Fits

The 3mm steel premounted euro baseplate is designed for use with Salice hinges Series F and Series B, so it drops into projects that standardize around those hinge lines. The euro screw interface works with system holes in cabinet sides, which suits frameless construction and line-bored casework. Standard 37 mm x 32 mm positioning lines up with common drilling patterns in shops using European-style hardware, helping this mounting plate match existing jigs and machinery. The 3mm height of the plate establishes the hinge seating level on the cabinet wall, which influences overlay and door position when paired with the correct Salice hinge arm. Nickel-plated, corrosion-resistant steel builds in durability for typical kitchen, bath, or commercial cabinet interiors where moisture and handling would otherwise mark bare steel.

Adjustment And Clip-On Design For Repeatable Results

The Domi Snap-On 1-Cam Steel Mounting Plate uses an economical clip on plate configuration compatible with all Salice hinges Series F and Series B, so hinges snap onto the baseplate without separate screws each time. That clip-on action speeds door hanging during installation and repeated removal during finishing or service because the hinge arm engages and disengages at the plate. Depth adjustment of -0.5 mm to +2.8 mm by eccentric cam centralizes in-and-out tuning at a single cam, which simplifies alignment when multiple doors need the same correction across a run of cabinets. Height adjustment of plus or minus 2 mm through slotted holes lets you loosen, shift, and retighten for vertical tuning, helping match door tops and bottoms along a bank. Nickel-plated, corrosion-resistant surfaces support smooth movement of both cam and mounting screws, which helps adjustments stay precise even when revisited later in the job.

Common Questions About This Salice Mounting Plate

Selecting This Plate For Salice Hinge Projects

The Domi Snap-On 1-Cam Steel Mounting Plate with euro screw, nickel-plated, 3mm brings an economical clip on plate into Salice Series F and Series B hinge work, so one part covers many frameless cabinet layouts. Depth adjustment of -0.5 mm to +2.8 mm by eccentric cam and height adjustment of plus or minus 2 mm by slotted holes give you the range needed to tune doors after boring and assembly. Standard 37 mm x 32 mm positioning and a nickel-plated, corrosion-resistant steel body support repeatable cabinet production and later service. For Salice-based projects run through Wurth Baer Supply, this hinge mounting plate aligns with professional installation workflows.