Clip-On Cam Adjustable Wing Mounting Plate describes a hinge mounting plate from Salice America that connects Salice hinges to the cabinet, so doors mount securely while remaining adjustable during installation and later alignment. This plate belongs to the hinge mounting plates product class, which means it serves as the fixed interface between the cabinet and the hinge arm. The mounting plate is compatible with all Salice hinges Series F and Series B, so one plate can serve multiple hinge lines within that family on the same project. A 0mm mounting plate height keeps the hinge arm close to the cabinet surface, which helps maintain consistent reveals when the cabinet design is built around a zero-millimeter plate position.
This hinge mounting plate provides depth adjustment of -0.5 mm to +2.8 mm by eccentric cam, so the installer can shift the door in and out from the cabinet face without moving the screws, which helps fine-tune reveals after the hinges are mounted. Height adjustment of plus or minus 2 mm is provided by slotted holes, so the plate can slide up or down slightly on the cabinet, allowing the door to be raised or lowered to align with adjacent fronts. The standard 37 mm x 32 mm positioning reference gives a consistent mounting layout, which supports repeatable drilling patterns across multiple cabinets on the same run.
This hinge mounting plate is categorized under hinges and hinge base plates, so it is intended for cabinet door applications using Salice hinges. The plate is specified as compatible with all Salice hinges Series F and Series B, which makes it suited to projects already using those concealed hinge families. The 0mm plate height works where the cabinet design and hinge specification call for a zero-millimeter mounting reference, helping maintain the intended overlay or inset relationship defined by the hinge series. The standard 37 mm x 32 mm positioning is suited to layouts that follow that drilling pattern, supporting consistent hole locations across production or field work.
The product name highlights pre-mounted Euro screws, which means the plate interfaces with Euro-style system boring in the cabinet, matching projects that use that installation method. Because this is a hinge mounting plate within the Salice DOMI SNAP description, it aligns with Salice clip-on hinge systems where quick connection between hinge arm and plate is part of the workflow. The nickel plated, corrosion-resistant finish suits typical indoor cabinet environments where hardware is expected to maintain function and appearance over years of door operation. Within Salice America offerings distributed by Wurth Baer Supply, this mounting plate provides a branded solution for matching Series F and Series B hinge jobs.
The hinge mounting plate offers depth adjustment from -0.5 mm to +2.8 mm through an eccentric cam, giving a small but useful in-and-out range that lets installers correct minor carcass and door variations without relocating the plate. That cam-based system allows changes by rotating the cam rather than loosening main mounting screws, which supports faster, controlled tweaking of door position during final fit. The plus or minus 2 mm height adjustment using slotted holes means the plate itself can shift vertically on the cabinet surface, providing enough travel to line up door tops and bottoms across a bank of cabinets.
Because this plate is compatible with all Salice hinges Series F and Series B, the same adjustment concept carries across multiple hinge models in those families, helping installers apply a consistent adjustment approach on every door. The clip on plate connection means once the mounting plate is set for height and depth, doors using these hinges can be clipped on and off without disturbing those adjustments, which simplifies later alignment or service work. The nickel plated, corrosion-resistant construction supports repeated adjustments over time without sacrificing the integrity of the plate surface in normal cabinet conditions.
The product is a Clip-On Cam Adjustable Wing Mounting Plate from Salice America, serving as a hinge mounting plate that connects Salice hinges to the cabinet structure.
The hinge mounting plate is compatible with all Salice hinges Series F and Series B, so it serves both of those concealed hinge families on cabinet projects.
The hinge mounting plate offers depth adjustment from -0.5 mm to +2.8 mm by eccentric cam, allowing in-and-out door positioning changes without remounting the plate.
The hinge mounting plate provides height adjustment of plus or minus 2 mm via slotted holes, enabling vertical door alignment relative to the cabinet layout.
The mounting plate is nickel plated and described as corrosion-resistant, supporting long-term use in typical cabinet environments where metal components are exposed.
The hinge mounting plate uses a standard 37 mm x 32 mm positioning, providing a consistent mounting reference for drilling and layout across cabinets.
This Salice America hinge mounting plate uses a 0mm height, standard 37 mm x 32 mm positioning, and a clip on connection, aligning well with cabinet work built around Salice Series F and Series B hinges. The combination of eccentric cam depth adjustment, slotted-hole height adjustment, and nickel plated, corrosion-resistant construction supports accurate alignment and sustained function. For projects supplied through Wurth Baer Supply, this Clip-On Cam Adjustable Wing Mounting Plate offers an economical, lifetime-warranty option when a Salice DOMI SNAP style mounting plate is required.
Sold In: 1 Each