Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 100 concealed hinge is built for cabinet doors on outward-angled boxes, carrying a positive 45-degree cabinet angle, Silentia soft-close, and expanding-dowel mounting on both face-frame and frameless cabinets.
When a cabinet box is built at an outward angle, a standard straight-arm hinge pushes the door out of plane with the run. This hinge resolves that by building the 45-degree cabinet angle into the hinge arm geometry, so the door hangs correctly relative to the angled box face. The 35mm cup bores into the back of the door at a standard 45mm bore pattern, and the arm connects to a Salice base plate on the cabinet, ordered separately. That plate is a Salice-specific component; plates from other brands will not engage this hinge arm. Height and side adjustment let you dial in the reveal once the plates are mounted, with plus or minus 2mm of height travel and 4.5mm of side movement toward the hinge or 1.5mm away.
The hinge body is steel with a nickel finish, a neutral tone that reads cleanly against white, gray, and natural wood interiors. Silentia soft-close is integrated into the hinge rather than added on, so the damping is consistent from the first install and there are no adapter parts to source separately. The expanding-dowel plate mount provides a firm mechanical connection that holds its position under repeated door movement, which matters on an angled door that may see more lateral stress than a standard overlay application.
This hinge is the right specification when a project includes bay cabinets, diagonal corner units, or any outward-angled run where the door must sit at 45 degrees relative to an adjacent cabinet face. It suits kitchen designers detailing custom corner layouts, cabinet shops running angled specialty pieces, and contractors sourcing for a remodel that includes a non-rectangular cabinet configuration. For a standard 90-degree cabinet, a straight-arm hinge from the same Series 100 line is the correct pick. For a negative-angle blind corner, the inward-angle version of this series applies instead.
It describes the angle of the cabinet box itself, not the opening angle of the door. A positive angle means the cabinet face opens outward at 45 degrees, as in a bay or diagonal corner unit. The hinge arm compensates for that geometry so the door hangs correctly.
No. The hinge body mounts to a separate Salice base plate that is sold independently. Plates are Salice-specific and match to the cabinet construction and door position you need.
The base plate anchors to the cabinet using an expanding dowel fastener rather than standard wood screws. It provides a strong mechanical connection and is a practical choice in production environments or where a firmer hold is wanted in the cabinet panel.
Yes. This hinge is compatible with both cabinet types when paired with the appropriate Salice plate for each construction. Select the face-frame or frameless plate to match your cabinet.
Specify this hinge when the design calls for a positive 45-degree cabinet angle with integrated soft-close and a finish that coordinates with standard nickel hardware across the project.
Sold In: 150 Each