Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 100 concealed hinge is built for cabinet openings that sit at a 45 degree outward angle, such as bay cabinets and angled corner units, on both face-frame and frameless construction. Silentia soft-close is integrated, and the hinge mounts to the door via press-in dowels.
A standard straight-front hinge will not position the door correctly on a cabinet that opens at a 45 degree outward angle. This hinge carries the geometry that lets the door swing clear of the angled opening without binding. It suits the diagonal face panels common in bay kitchens, peninsula corner units, and angled accent cabinets, on either a frameless box or a face-frame case. The 35mm cup bores into the door at the standard depth, and the dowel pins press into pre-drilled holes beside the cup rather than relying on cup screws, which keeps the door-side installation fast and repeatable on a CNC line. A matching Salice base plate mounts to the cabinet and the hinge arm connects to it; the plate is a separate purchase, sized to your cabinet construction and the overlay position you need.
The hinge body is steel finished in nickel. Silentia is Salice's integrated soft-close system, built directly into the hinge rather than added on as a clip-on accessory. That means the damping is consistent from the first install and nothing extra to clip on or lose during a volume job. The height adjustment of plus or minus 2mm and side adjustment of plus 4.5mm and minus 1.5mm give enough range to correct minor door positioning after installation without pulling the hinge.
The dowel mount format is a natural fit for production environments where the door boring is handled on a CNC machine and cup screws slow the line down. It also suits custom cabinet makers building angled bay sections who want the same soft-close result the rest of the kitchen carries. Because the cabinet angle is a fixed 45 degrees outward, this hinge is specific to that geometry; a standard cabinet or a different angle needs a different hinge. For doors thicker than about 22mm in this application, confirm the cup depth is appropriate before ordering.
No. The hinge arm connects to a separate Salice base plate that mounts to the cabinet side or face frame, and that plate is sold separately. Use a Salice plate matched to your cabinet type and the overlay position you want.
It means the hinge is engineered for a cabinet front that opens outward at a 45 degree angle relative to square, the diagonal configuration used on bay-style and corner accent cabinets. It is not a description of the hinge's opening swing.
Dowel mounting uses pre-attached pins on the hinge cup that press into bored holes in the door, so no cup screws are needed. Screw mounting fastens the cup to the door with screws through the cup flange. Dowel mounting is common in CNC production where door boring is done in batch.
No. Salice hinge arms connect to Salice plates. Plates from other brands use different engagement systems and will not connect to this hinge arm.
Specify this hinge for 45 degree outward-angled cabinet fronts where Silentia soft-close and a production-friendly dowel mount are both on the requirement list.
Sold In: 150 Each