Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 200 Logica hinge is built for cabinet faces set at a 30-degree outward angle, hanging overlay doors on angled, bay, or corner cabinet configurations with a self-close spring and toolless arm mounting on both face-frame and frameless cabinets.
Standard concealed hinges are engineered for cabinet faces that meet at 90 degrees. When a cabinet is built at an outward angle, such as a bay kitchen layout, a diagonal corner unit, or an angled island end, the door needs a hinge geometry that matches that angle so it hangs square and closes cleanly. This hinge is built for exactly that condition: the 30-degree positive cabinet angle positions the door against the angled face rather than fighting it. The 35mm cup bores into the back of the door in the same way as any standard concealed hinge, and the arm clips to a Salice base plate mounted on the cabinet. The base plate is a separate purchase and must be a Salice-compatible plate matched to your cabinet construction.
The hinge body is steel with a nickel finish. On an angled cabinet where the hinge is doing geometry work that a standard hinge cannot, durability of the arm connection matters. The Logica clip mechanism holds that connection firmly while still allowing tool-free removal when a door needs to come down. Height adjustment of plus or minus 2mm and side adjustment of plus 4.5mm or minus 1.5mm let you fine-tune the door position after the cabinet is set, which is useful on angled layouts where getting an even reveal takes a little more dialing in.
This hinge is the right pick for shops and contractors building or installing angled kitchen runs, diagonal corner cabinets, or bay-style configurations where the cabinet face is set at 30 degrees. It fits both frameless and face-frame boxes, so one SKU covers the angled doors across a mixed project. Because the 30-degree geometry is built into the hinge arm, no shimming or field modification is needed to achieve the correct door hang. This is not a standard hinge pressed into an angle application; it is purpose-built for it. For doors requiring a cushioned, damped close rather than a spring pull, consider the Silentia+ soft-close version in this series.
The arm geometry is built to a 30-degree positive cabinet angle. On a standard 90-degree cabinet, a standard overlay hinge works fine. On an outward-angled face, the standard hinge will not position the door correctly. This hinge is made for that specific angle.
No. It is a self-close hinge. A spring pulls the door shut over the last few degrees, but there is no damper to slow or cushion the close. For a quiet, damped close, the Silentia+ soft-close version of this series is the alternative.
Yes. The hinge arm clips to a base plate that fastens to the cabinet, and that plate is sold separately. Use a Salice-compatible plate matched to your cabinet type. Plates from other brands will not connect to this hinge.
On an angled cabinet, 94 degrees is the engineered opening for this geometry. The angle of the cabinet face itself reduces the effective clearance, so the hinge opening is sized to match the application rather than a standard 90-degree box.
When the layout calls for a 30-degree outward cabinet angle, this hinge handles the geometry so the door sits correctly, closes reliably, and adjusts cleanly after install.
Sold In: 150 Each