Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 200 Logica hinge is built for cabinet doors mounted at a positive 15-degree angle, covering both frameless and face-frame construction with self-close action and toolless arm engagement.
Standard concealed hinges assume the cabinet face is perpendicular to its sides. When the front is canted outward at 15 degrees, a standard hinge cannot seat the door correctly at the correct position or let it swing clear without binding. This hinge is engineered specifically for that +15-degree cabinet angle, so the door opens and closes without fighting the geometry. The 35mm cup bores into the door in the usual way, and the arm connects to a Salice base plate mounted to the cabinet. That plate is sold separately and must be a Salice plate matched to this series. Plates from other brands will not connect.
The hinge is plated steel in a Nickel finish. For a corner or bay application, where hardware is often more visible than on a standard run of cabinets, the Nickel finish coordinates with other visible hardware in the space. The 94-degree opening is correct for this cabinet angle: it is not a shortcoming but the engineered swing that lets the door clear the cabinet edge cleanly at 15 degrees of cant. After installation, the height and side adjustment brings the door to an even reveal without removing and repositioning the plate.
Reach for this hinge on angled bay cabinets, diagonal corner units, and any frameless or face-frame cabinet where the front panel is set at a positive 15-degree angle to the cabinet sides. It suits kitchen designers specifying a diagonal corner run, cabinet shops building angled appliance garages, and remodelers matching a period layout with splayed cabinet faces. For a cabinet set at a different angle, confirm the angle of the cabinet first and select the hinge whose cabinet angle attribute matches it. This hinge is for the +15-degree condition only.
It describes the angle between the cabinet face and its sides. A positive angle means the face is canted outward, as in a bay or diagonal corner cabinet. This hinge is built for that specific 15-degree outward cant. It is not suitable for a standard 90-degree cabinet or a negative-angle blind-corner application.
No. This hinge is self-close: a spring pulls the door shut over the last few degrees. It does not cushion or slow the close. For a damped, quiet close on an angled door, look for the Silentia+ soft-close version in this series.
Yes. The hinge arm clips to a base plate that mounts to the cabinet, and the plate is sold separately. Use a Salice plate matched to this series. Plates from other brands are not compatible with this hinge.
The 94-degree opening is correct engineering for a 15-degree angled cabinet. The reduced swing lets the door clear the cabinet edge without collision at this geometry. It is the right angle for this application, not a limitation.
When the cabinet angles outward, this hinge keeps the door square to it, closing cleanly on a spring and adjusting to a consistent reveal without the workarounds a standard hinge would require.
Sold In: 150 Each