Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 200 concealed hinge is built for cabinet boxes set at a 37-degree outward angle, the geometry found in bay cabinets, diagonal corner runs, and angled cabinet ends. It is a self-close hinge that mounts by screw-on to both face-frame and frameless cabinets.
A standard concealed hinge is built for a 90-degree cabinet box. When the cabinet sits at an outward angle, as it does in a bay configuration or a diagonal corner run, the door plane shifts and a standard hinge produces misalignment or keeps the door from closing cleanly. This hinge is engineered for exactly that condition: a +37-degree cabinet angle that opens outward. The 35mm cup bores into the door in the usual way, and the arm geometry compensates for the rotated cabinet face so the door hangs plumb and the self-close spring pulls it shut squarely. The base plate mounts to the cabinet side or stile with wood screws, making it straightforward to install on either frameless boxes or face-frame construction without needing pre-bored 5mm system holes.
The hinge is stamped steel with a nickel finish. On an angled cabinet run, the hinge is concealed when the door is closed, so the finish reads mostly at installation and through the door swing. The 45mm boring pattern aligns with standard jig setups, which keeps the cup boring step consistent across an angled and standard mixed run. Height adjustment of plus or minus 2mm and side adjustment of plus 4.5mm to minus 1.5mm give enough range to bring doors to a clean, even reveal after the cabinet is positioned.
This hinge is the right call for cabinetmakers, installers, and designers who are specifying a bay or diagonal corner cabinet where the box sits at a 37-degree outward angle from the adjacent run. It suits both production shops working through an angled kitchen layout and custom builders fitting a one-off diagonal cabinet into a built-in or entertainment unit. Because the cabinet angle is fixed at plus 37 degrees, this hinge is not a substitute for a standard hinge on a square cabinet, and it will not seat correctly on a cabinet built to a different angle. Match the cabinet angle to the hinge before ordering. A compatible Salice base plate, matched to your cabinet construction, is required and sold separately.
It means the cabinet face is rotated 37 degrees outward from the wall plane, as in a bay or diagonal corner cabinet. The plus sign indicates the angle opens outward. This hinge compensates for that rotation so the door closes squarely.
No. This hinge requires a separate Salice base plate matched to your cabinet construction. Use Salice plates only: plates are brand-specific and a plate from another brand will not connect to this hinge.
Yes. The screw-on mount fastens with wood screws directly to the cabinet side or face-frame stile. No 5mm pre-drilled system holes are needed, which makes it practical for both site-built and shop-built cabinets.
No. This is a self-close hinge: an internal spring pulls the door shut over the last few degrees of travel. It does not cushion or slow the close. For a damped, quiet close on an angled cabinet, look for the Silentia+ soft-close version in this series.
When the cabinet angles out and a standard hinge will not do, this Salice Series 200 angled hinge keeps the door aligned, the reveal even, and the self-close reliable across the full angled run.
Sold In: 150 Each