Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 200 concealed hinge is built specifically for blind corner cabinet doors, where the opening angle is controlled so the door clears an adjacent cabinet without collision. Silentia soft-close is integrated, and the hinge mounts on both face-frame and frameless boxes.
A blind corner cabinet sits where two runs of cabinetry meet at a corner, with one door positioned so it would strike the adjacent cabinet face if it opened too wide. That is exactly what this hinge is engineered for. The 94-degree opening angle is not a shortcoming: it is the designed limit that lets the door swing fully without hitting the neighboring cabinet. Specify it for the door on the blind side of the corner run, and the geometry takes care of the clearance problem.
The 35mm cup bores into the back of the door at the standard depth. The arm then connects to a Salice base plate mounted on the cabinet, which is sold separately. Because plates are Salice-specific, use a Salice plate matched to your cabinet construction and desired overlay position. For face-frame cabinets, choose a face-frame plate; for frameless boxes, use the corresponding Salice frameless plate.
The hinge body is steel in a nickel finish. Silentia soft-close is built directly into the hinge arm, so no separate damper adapter is needed. On a blind corner door that swings close to an adjacent surface, a controlled, cushioned close matters: it protects the door finish and the surrounding cabinetry from the impact of a free-swinging slam. The screw-on connection gives a firm, permanent mount without relying on pre-drilled system holes, which makes it practical on custom and site-built cabinets where 5mm line-bore holes may not be present.
This is a purpose-built part for one specific problem: hanging the overlay door on a blind corner cabinet while keeping it from striking the adjacent run. Cabinet shops building corner units, designers specifying corner kitchen layouts, and remodelers replacing worn hardware on existing blind-corner boxes all reach for this hinge. It suits doors in the standard 16 to 22mm thickness range on either face-frame or frameless construction. If the corner door is a standard non-adjacent door that needs a wider swing, a full 110-degree hinge is the correct pick. This hinge is for the corner door only.
The 94-degree limit is intentional. On a blind corner cabinet, the door sits next to an adjacent cabinet panel. Without a restricted angle, the door would contact that panel when opened. The 94-degree geometry gives the door its full useful swing while keeping it clear of the neighboring cabinet.
Yes. This hinge connects to a base plate that mounts to the cabinet side or frame, and that plate is a separate purchase. Use a Salice plate matched to your cabinet type. Plates from other brands will not connect to this hinge.
No. Silentia is Salice's soft-close damper system. It slows the door over the last few degrees of travel so it settles quietly rather than slamming shut. A self-close spring pulls the door shut but does not cushion the contact. This hinge has the damped, quiet close.
It will function mechanically, but its 94-degree opening is narrower than the 110-degree standard, so access will be limited. For doors not adjacent to another cabinet panel, use a standard 110-degree hinge for full everyday opening.
Specify this hinge when the design puts an overlay door right next to an adjacent cabinet run and the job calls for a soft, controlled close every time.
Sold In: 150 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 3000 Each |  UBS2XX85H9 Mfr# S2XX85H9 | Flange Cover Cap, Nickel | ||||
Sold in: 1 Each |  UBS2A637XF Mfr# S2A637XF | Salice 94° Hinge Stop Device for Series 200 Hinges S2A637XF |