Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 200 hinge brings Silentia soft-close to half overlay doors on both face-frame and frameless cabinets, with a screw-on mount and a nickel finish that blends with polished and brushed hardware alike.
Half overlay is the call wherever two doors share a single partition or stile, each covering about half the cabinet side. The half crank arm positions the door at that partial overlap, so the pair closes evenly without the arms colliding on the shared edge. The 94 degree opening is a deliberate fit for tight spaces: it clears enough to reach inside comfortably while keeping the door from swinging into a wall or an open adjacent door. That angle is a solution, not a compromise. The 35mm cup bores into the back of the door, and the arm connects to a Salice base plate on the cabinet, which is a separate purchase matched to your cabinet construction.
The hinge is plated steel in a nickel finish. Nickel reads as a neutral, slightly warm tone that coordinates easily across a wide range of kitchen and bath hardware, from brushed metal pulls to polished fixtures. The Silentia damping is integrated, so there is no separate cartridge to seat or replace, and the mechanism is built to repeat the same quiet close across years of daily use. Side and height adjustment lets you bring paired doors to an even, consistent reveal once the cabinet is set.
Cabinet shops specifying hardware for traditional American kitchens lean on this hinge when the design calls for a partial-overlay door with soft-close in a finish that coordinates with nickel or stainless pulls. Remodelers replacing worn hinges in existing face-frame cabinets find it a natural match for the layout and finish palette already in place. It also suits frameless builds where a half-overlay layout is specified and the installer wants a screw-on connection over a toolless clip. For doors thicker than about 22mm, a thick-door hinge is the right choice instead of this standard cup depth.
Yes. This hinge connects to a Salice base plate that mounts to the cabinet, and the plate is sold as a separate item. Choose a Salice plate matched to your cabinet type and the overlay position you need.
The 94 degree angle is designed for installations where the door would otherwise strike a wall, a pilaster, or the adjacent open door. It gives practical access while keeping the swing contained in tight spaces.
No. Salice plates are specific to Salice hinges. The arm engagement and bore pattern are not shared with other brands, so a plate from Blum, Grass, or Hettich will not connect to this hinge.
Yes. The hinge offers side adjustment and height adjustment so you can align paired doors to a consistent reveal once everything is mounted.
Specify this hinge when a half overlay layout, a controlled swing, and a nickel finish all need to come together with integrated soft-close that does not require a separate add-on.
Sold In: 300 Each