Salice Series 200 self-opening hinge is a concealed cabinet hinge designed as part of an integrated system of hinges developed to provide a solution for projects involving concealed hinges. This 94 degree self-opening hinge is a full overlay option for face-frame and frameless applications, so doors can cover the cabinet front as required by the layout. As a concealed long arm hinge in the Salice 200 Series, it keeps hardware out of sight while providing the functional travel needed in a standard European hinge configuration. The hinge is nickel finished, giving a consistent look with other nickel hardware in the same run of cabinetry. As a self-opening hinge, it is intended for use with a release device so the pressure to the door activates opening without a handle, which supports touch-operated door setups.
Salice Series 200 94 degree self-opening hinges use a cup depth of 11 mm on the 200 Series 110 and 165 degree push to open hinges, a detail that shows this family is compatible with many standard cabinet door profiles using shallow boring. The hinge cup edge drilling distance of 3 mm to 9 mm gives a usable range when laying out the cup relative to the door edge, helping fit doors with different overlay requirements inside one system. The hinge features patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw, so the installer can shift the door laterally without changing the cup boring, which simplifies fine tuning reveals after mounting. This hinge uses a press-in dowel cup fastening design, which speeds placement of the hinge in the bored cup when the correct dowel bores are prepared.
This Salice 200 Series self-opening concealed cabinet hinge is part of a system developed to provide a solution for any project involving concealed hinges, so it fits into runs of cabinets designed around European concealed long arm hinges. As a full overlay hinge for face-frame and frameless hinges, it serves both types of cabinet construction where the door is intended to cover most of the front. The hinge is identified as a Salice thick door hinge for maximum door thickness of 35 mm with special profiles, so door designs within this thickness range can be planned around the hinge capabilities. Because the pressure to the door activates a release device at which point the hinge takes over and opens the door completely, this hinge supports push-to-open door setups in kitchens, baths, and casework projects using touch fronts. The release device also serves to hold the door in the closed position as well as to release the door, so each door can be kept shut without a mechanical knob latch.
The Salice Series 200 design, with 94 degree self-opening function, gives a known door swing that can be repeated cabinet to cabinet, which helps keep alignment consistent next to appliances or walls. The 11 mm hinge cup depth used on 200 Series 110 and 165 degree push to open hinges shows that the Series is built around shallow cup machining, so fabricators can run standard boring patterns across door sizes. A hinge cup edge drilling distance of 3 mm to 9 mm allows installers and shops to use one hinge family across different overlays by shifting the boring distance within that range. The patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via hinge arm screw lets doors be aligned after installation by dialing in gaps instead of reboring or shifting mounting plates. Because Series 200 hinges are designed to work with Salice mounting plates, shops can standardize on one mounting plate system and hinge family, which streamlines layout and replacement work. The press-in dowel cup fastening design also aligns hinge cups predictably in the bored holes, supporting repeatable positioning from door to door.
The Salice C2RVA99 is a Salice Series 200 94 degree self-opening concealed cabinet hinge, so it is intended for use in projects using European concealed long arm hinges.
The hinge works at 94 degrees, which sets the maximum door opening angle and helps plan clearances when cabinets are placed near walls or other fronts.
The hinge is specified as a Salice thick door hinge for maximum door thickness of 35 mm with special profiles, so doors up to that thickness are supported.
The hinge works with a release device so pressure on the door activates the device, then the hinge takes over and opens the door completely for a push-to-open motion.
The hinge offers patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw, allowing lateral fine tuning of door alignment.
The hinge uses a press-in dowel cup fastening design and is designed to work with Salice mounting plates, forming part of an integrated Salice hinge and plate system.
This Salice 200 Series 94 degree self-opening concealed cabinet hinge provides full overlay operation for face-frame and frameless cabinets while supporting touch-operated doors. With its press-in dowel cup fastening and defined 3 mm to 9 mm cup edge drilling distance, it fits neatly into production boring patterns. The patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via hinge arm screw then allows straightforward door alignment on site. For shops and installers building around Salice mounting plates, this hinge ties into the broader Series 200 system so projects can share one concealed hinge platform.
Sold In: 300 Each