Salice Series 200 94 degree hinge is a concealed cabinet hinge designed for projects that need a self-opening, push-activated door. This hinge is part of the Salice Series 200 system, so it fits into a coordinated concealed-hinge solution for cabinet work. As a self-opening hinge, it uses pressure to the door to activate a release device, then the hinge opens the door completely, which streamlines access without pulls in push-to-open layouts. The same release device also serves to hold the door closed, so the hinge both latches and releases the door in one integrated motion. This model is a half overlay configuration for face-frame or frameless cabinets, which lets you plan door reveals consistently in mixed construction shops. The hinge belongs to the Salice America 200 Series family, giving you a familiar setup if you already use their mounting plates.
This Salice C2RVG99 hinge uses a press-in dowel cup fastening design, so the hinge cup secures into pre-bored holes with dowels pressed into the door, which can speed repetitive production where a line borer is in use. The 200 Series hinges offer cup depths of only 11 mm, which lets the hinge work with most cabinet door profiles that cannot accept deeper cups, reducing the chance of breaking through thinner panels. The hinge cup edge drilling distance ranges from 3 mm to 9 mm, which gives flexibility when setting up boring patterns for different overlays and door styles. This hinge is a 94 degree opening model, so the door swings to a controlled angle that suits many wall and base cabinet runs without overtravel into adjacent obstacles.
Salice 200 Series self-opening hinge works in cabinet projects that call for concealed hardware and push opening. It is specified as a thick door hinge for maximum door thickness of 35 mm with special profiles, so it supports doors that go beyond light thin-panel construction. By handling these thicker doors, the hinge lets you use heavier profiles while still relying on a compact 11 mm cup, which is important when working near routed edges or decorative faces. The hinge is developed as part of a broader Series 200 concealed hinge system, so it suits shops that standardize on Salice for their projects. As a 94 degree hinge, it opens the door enough for access while maintaining a restrained swing, useful when cabinets are close to walls, adjacent doors, or appliances. Because it is a half overlay face-frame and frameless hinge, it works in layouts where two doors share a stile or where the door overlays the cabinet side only partway, giving flexibility in traditional and frameless lines.
This Salice Series 200 hinge provides a patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw, so you can shift the door laterally while keeping it parallel to the cabinet front, which simplifies fine-tuning reveals across a bank of doors. The push to open function uses pressure on the door to activate a release device, and once triggered, the hinge takes over and opens the door completely, which reduces the steps needed to access the cabinet in push-latch designs. The release device also holds the door closed, so the same internal mechanism controls both the closed position and the opening start point, helping maintain consistent gaps over time. Salice notes that there are mechanical and magnetic release device types in this system, giving project planners options when matching the release style to the cabinet design. Since 200 Series hinges are designed to work with Salice mounting plates, the adjustment and release features can be combined with plate selection to dial in overlay and gap targets.
The Salice C2RVG99 is a concealed cabinet hinge from the Series 200 line, so it hides inside the cabinet while providing a self-opening push-activated motion for clean-front cabinet designs.
The hinge is a 94 degree opening model, so the door swings to about a right angle, which is typically enough for comfortable access while limiting interference with nearby cabinets or walls.
The hinge uses pressure on the door to activate a release device, and once triggered, the hinge opens the door completely, which suits handle-free push to open cabinet setups.
This Salice thick door hinge is for maximum door thickness of 35 mm with special profiles, which supports heavier or shaped doors in projects using thicker materials.
The hinge offers patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw, which helps align doors and even out reveals during installation.
The 200 Series hinge has an 11 mm cup depth, which lets it work with most cabinet door profiles that cannot accept deeper cups, especially on thinner or detailed fronts.
Salice Series 200 94 degree hinge gives you a self-opening concealed hinge option for half overlay face-frame and frameless cabinets, so it fits push-to-open projects using thicker doors up to 35 mm. The 11 mm cup depth and 3 mm to 9 mm cup edge drilling range support flexible boring setups across different door styles. With plus 4.5 mm to minus 1.5 mm parallel side-to-side adjustment through the arm screw, the hinge helps deliver clean, repeatable gaps along a full run of doors. For cabinet runs built around Salice mounting plates and push-activated openings, this hinge provides a coordinated choice ready to drop into your next layout.
Sold In: 300 Each