Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 200 hinge is built for inset doors on face-frame and frameless cabinets, with a self-open (push-to-open) mechanism and dowel mounting in a nickel finish. The door sits flush inside the cabinet opening rather than over it, and a press on the front releases it to swing open without a handle.
An inset door sits inside the cabinet opening with a narrow, even gap around all four edges. It is one of the more demanding fits in cabinetry because the door must clear the frame as it swings without binding. The 94 degree opening angle is the right geometry for that application, allowing the door to swing fully clear without colliding with the frame edge. Because an inset door sits inside the opening, the full crank arm positions the door correctly relative to the cabinet side.
The self-open feature is what makes this hinge the pick for handle-less fronts. A gentle press on the door face triggers the mechanism and swings the door open, removing the need for pulls or knobs on an inset panel. A matching Salice base plate mounts to the cabinet and the hinge arm connects to it, ordered separately. Plates are Salice-specific and not interchangeable with other brands.
The hinge is plated steel in a nickel finish. For an inset application, where the hardware sits inside a tight-tolerance opening, a clean nickel finish keeps the visible parts of the hinge consistent with other nickel hardware in the run. The 35mm cup with 45mm boring pattern is the standard layout for this series. Height adjustment of plus or minus 2mm and side adjustment of plus 4.5mm and minus 1.5mm let you correct an uneven reveal once the cabinet is in place. Maximum door thickness is 1-3/8 inches.
This hinge suits cabinet shops and installers working on handle-less inset fronts, whether on frameless or face-frame boxes. It is also a natural fit for furniture makers and designers specifying a flush-face look without visible hardware. The dowel mount is a production-friendly choice: the cup presses into pre-bored dowel holes in the door without cup screws, which speeds up CNC-routed door cycles. For projects that do not need push-to-open and just want a quiet self-close inset hinge, the self-close version of this series is the alternative to consider.
No. The hinge arm connects to a Salice base plate that mounts to the cabinet, and that plate is sold separately. Use a Salice plate matched to your cabinet construction and the inset position you need.
Self-open is a push-to-open mechanism. Pressing on the door face triggers the release and the door swings open, so no pull or knob is needed. It is not a soft-close or self-close spring; it holds the door shut and releases it on demand.
Yes. This hinge works on both face-frame and frameless cabinets when paired with the appropriate Salice base plate for your cabinet type.
The 94 degree angle is the correct geometry for inset doors, where the door must clear the surrounding frame as it opens. The frame limits the swing, and 94 degrees is engineered to give full practical access without the door contacting the cabinet front.
Specify this hinge when the design calls for flush inset doors that open at a touch, with no visible pulls and a nickel finish that stays consistent across the job.
Sold In: 300 Each