Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 700 hinge is built for cabinet doors mounted at a positive 24-degree corner angle, delivering integrated Silentia soft-close performance on both face-frame and frameless cabinets.
Bay windows, diagonal corner units, and angled cabinet runs present a geometry that a standard straight hinge cannot handle. This hinge is engineered to that 24-degree positive angle, meaning the hinge body is offset so the door hangs correctly on a cabinet face that opens outward from a corner rather than sitting flat. The 35mm cup bores into the door at 13.5mm depth, and the arm connects to a Salice base plate on the cabinet. That plate is a separate purchase and must be matched to your cabinet construction, whether frameless panel or face-frame stile. Plate compatibility is specific to the Salice system, so use Salice plates only.
The Series 700 is Salice's premium concealed line. The hinge is steel with a nickel finish, and Silentia soft-close is integrated directly into the hinge body rather than added as a clip-on damper. On angled cabinetry where the door's swing arc is offset from the usual plane, a damped close keeps the door from carrying momentum into the frame. The 45mm boring pattern aligns with standard production tooling, and the dowel mount cup eliminates cup screws entirely, which matters in high-volume shops where shaving seconds per door adds up across a job.
This hinge belongs on projects where the cabinet layout breaks from a flat run: a bay kitchen with angled end units, a diagonal corner cabinet in a bath, or any casework design where the door face opens at a 24-degree outward angle. It suits cabinet shops running CNC-bored doors who want to press the hinge in without a screwdriver, and designers specifying a premium soft-close on custom angled cabinetry. For a standard flat cabinet, a straight-arm concealed hinge is the correct choice. This one is purpose-built for the angle.
A standard concealed hinge is designed for a cabinet face that sits at 90 degrees to the wall. This hinge is offset to account for a cabinet face that angles outward by 24 degrees, as in a bay or diagonal corner unit. Using a standard hinge in that position produces a door that sits or swings incorrectly.
No. The base plate that mounts to the cabinet is sold separately. Choose a Salice plate matched to your cabinet type, frameless or face-frame. Plates from other brands will not connect to this hinge.
The cup carries pre-attached dowels that press into bored dowel holes in the door. No cup screws are needed. It is the standard approach on CNC-equipped production lines where doors are bored to the dowel pattern before hinging.
No. Silentia is Salice's soft-close system: a built-in damper slows the door over the last few degrees so it closes quietly. Self-close uses a spring to pull the door shut without cushioning. This hinge has the damped soft-close, not a spring pull.
When the cabinet layout calls for a 24-degree outward angle and the finish demands a premium soft-close, this Series 700 hinge delivers both without compromise.
Sold In: 150 Each