Dowel-Mount Angled Cabinet Hinge for 45-Degree Bay Doors

This Salice Series 200 concealed hinge is built for cabinet doors that sit on a 45-degree outward cabinet angle, such as bay-style and diagonal-corner cabinets, with Silentia soft-close and a dowel-mount cup for CNC and production boring environments.

Key Features

• +45-degree cabinet angle geometry positions the door correctly on an outward-angled bay or diagonal cabinet face.
• Silentia soft-close dampens the door over the final closing arc so it settles quietly against an angled opening.
• Dowel-mount cup presses into pre-bored dowel holes in the door without cup screws, built for CNC production workflow.
• 110-degree opening angle delivers standard everyday access on angled cabinetry.
• Height and side adjustment fine-tunes door alignment after installation, correcting for the tighter tolerances that angled doors demand.

The Right Hinge for an Outward Bay Corner

Standard concealed hinges are engineered for cabinets with 90-degree fronts. When the cabinet face angles outward at 45 degrees, a standard hinge geometry pulls the door off-square and prevents a clean close. This hinge is built with the arm and cup geometry that accounts for the 45-degree cabinet angle, so the door swings through its full arc and closes flat against the angled face. The 35mm cup bores into the back of the door, and the hinge arm connects to a Salice base plate mounted to the cabinet, ordered separately. Matching a Salice plate to this hinge keeps the arm-to-plate connection correct; plates from other brands are not compatible.

Steel Build and Damped Closing in a Tight Corner

The hinge is plated steel in a nickel finish. In a bay or diagonal cabinet, the door closes into a constrained space where a slamming door does real damage to both the door edge and the adjacent frame over time. The integrated Silentia soft-close damper slows the door through the final degrees of travel so it seats quietly on every close. That matters more on an angled cabinet than a standard one, because the angled geometry leaves less room for the door to absorb impact.

Where This Hinge Belongs

This hinge suits cabinet shops and millworkers building bay-style kitchen cabinets, diagonal corner units, and angled casework on either frameless or face-frame construction. The dowel-mount cup is the right pick for CNC shops where doors come off the machine with pre-bored dowel holes already set to the boring pattern. For installations where cup screws are the preferred fastening method, a screw-on cup version of this series is the appropriate choice. Door thickness for standard concealed hinge use runs from 16 to 22mm; for doors outside that range, confirm the correct series before ordering.

Common Questions

Quiet, Square Doors on Every Angled Cabinet

Specify this hinge when the job calls for a 45-degree bay or diagonal cabinet door that closes cleanly and quietly, with a dowel-mount cup that keeps production moving.