Silentia Hinge Spacers 0.6mm Height For Silentia 110 Deg Hinges

Silentia Hinge Spacers 0.6mm Height For Precise Cup Setup

Silentia hinge spacers 0.6mm height give you a fixed, known offset at the hinge cup, so you can dial in consistent reveals on cabinet doors using matching Silentia 110 deg hinges. The 0.6mm height is small enough to fine-tune alignment without changing the basic drilling pattern, which helps keep shop setups and templates working the way you expect. Because these are Silentia hinge cup spacers, they sit at the hinge cup interface, so the adjustment happens right where the hinge meets the door. That placement lets you correct minor layout or drilling variation at the hardware instead of modifying the cabinet or door.

Key Spacer Details That Support Clean Install Work

• The Silentia hinge cup spacers designation means the spacer is designed to sit directly under the hinge cup, so the correction occurs at the hinge mounting point for more predictable door motion.
• The 0.6mm height lets you apply a controlled, minimal change to the cup position, which is useful when small shifts in overlay or gap are affecting the way doors meet and swing.
• The hinge spacers and wedges product class focuses this part on fine adjustment of hinge geometry, so it serves as a small corrective element rather than a structural hinge component.
• The Salice America brand association ties the spacer to the Silentia hinge system, supporting consistent performance when you are standardizing on Silentia hardware across a run of cabinets.
• The S2XX86BT manufacturer part designation lets you call out this exact 0.6mm spacer in shop drawings, parts lists, and re-order notes, which simplifies repeat work and service calls.

Using Silentia Hinge Cup Spacers In Installation Layouts

The fact that these are Silentia hinge cup spacers means they work at the cup location, so installers can use them as part of the drilling and layout plan rather than altering the cabinet case. When used with Silentia 110 deg hinges, the 0.6mm height gives a modest shift that can bring door faces into line when reveal targets are tight. In runs that also use 155 deg hinges, the same spacer style ties both hinge types to a common adjustment approach at the cup, which keeps layout logic simple across different opening angles.

How This 0.6mm Silentia Spacer Performs In Practice

Where Silentia Hinge Cup Spacers Are Applied

This spacer is specified for use with 110 deg hinges and 155 deg hinges in the Silentia family, so it is intended for cabinet doors that rely on that concealed hinge system. By working at the hinge cup, the spacer fits into the same general footprint as the hinge cup drilling, keeping the correction close to the pivot point and helping the door move as expected. Because it sits in the hinge spacers and wedges class, it is used where small geometric corrections matter, such as aligning doors across a long bank of cabinets or matching overlays on paired doors. In these applications, the 0.6mm height functions as a predictable shim value, which is easier to standardize than ad-hoc shimming materials during installation.

Why The 0.6mm Height Matters For Repeatable Results

The defined 0.6mm height is central to how this spacer supports repeatable cabinet work, because each spacer adds the same small change to the hinge cup position. When you apply that exact offset with Silentia 110 deg hinges, you can calculate and repeat the resulting overlay and gap, rather than guessing at shim thickness from job to job. In layouts that also use 155 deg hinges, relying on the same 0.6mm spacer helps align expectations for how far doors will sit relative to the face of the cabinet. Over multiple installations or production runs, calling out S2XX86BT in documentation ties your hinge strategy to a specific, measurable adjustment part, which streamlines both initial fitting and later replacement work when doors or hinges are changed in the field.

Common Questions About The S2XX86BT Hinge Spacer

Selecting This 0.6mm Spacer For Silentia Hinges

Choosing the Silentia hinge spacers 0.6mm height lets you define a consistent adjustment strategy around Silentia 110 deg hinges and 155 deg hinges. By tying layouts to the S2XX86BT part number, shops and installers can repeat the same small, predictable cup correction across current and future cabinet projects.