Silentia Hinge Spacers 1.8mm Height For Silentia 110 Deg Hinges

Silentia Hinge Cup Spacers For Precise Hinge Setup

Silentia hinge cup spacers give installers a dedicated way to adjust Salice Silentia hinge cup position using a fixed 1.8mm height. The spacer sits between the Silentia hinge cup and the mounting surface, changing the cup stand-off and the relationship between the door and cabinet. For jobs using Salice Silentia 110 deg hinges or 155 deg hinges, this spacer supplies a repeatable offset that matches Salice hinge geometry. The part is classified as a hinge spacer and wedge, so it is intended to work as part of the hinge stack rather than as door edge trim or a generic shim. With the Salice America S2XX86KT part number, installers can match this spacer to hinge schedules and drawings that reference the same code, which simplifies ordering and replacement across multiple projects.

Key Spacer Details That Support Hinge Layout

• The 1.8mm height establishes a consistent gap under the Silentia hinge cup, which influences overlay and reveal across a run of doors.
• Design as a hinge cup spacer means it locates directly under the cup, giving a controlled change at the hinge pivot instead of a loose shim elsewhere.
• Use with 110 deg Silentia hinges ties the spacer to common cabinet applications where that opening angle is specified.
• Use with 155 deg Silentia hinges connects the same spacer to wide-opening doors, keeping hardware components consistent on mixed-angle jobs.
• Classification as a hinge spacer and wedge positions it for fine-tuning hinge setups without changing the specified hinge model.

Hinge Spacer Fit For 110 Deg And 155 Deg Models

This spacer is specified for use with Silentia 110 deg hinges and Silentia 155 deg hinges, so it targets the main Salice Silentia hinge families found in many cabinet layouts. The 1.8mm height provides a fixed offset at the hinge cup that can be used in design calculations or field adjustments when those hinge models are installed. Because the spacer is identified as a hinge cup spacer, its role is clearly to work inside the hinge mounting stack, not as an unrelated support component. That clarity helps installers understand exactly where it belongs when planning or revising hinge boring patterns.

Using Salice Silentia Spacers In Real Projects

Where This 1.8mm Silentia Spacer Fits Best

The spacer is defined as a Silentia hinge cup spacer for Salice Silentia hinges, so it fits into projects already standardized on that hinge line. In a run of cabinets using Silentia 110 deg hinges, adding this 1.8mm spacer beneath the hinge cup alters the cup depth relationship in a controlled way, allowing door-to-cabinet geometry to better match drawings based on that offset. On installations using Silentia 155 deg hinges, the same spacer height again changes the cup stand-off, supporting applications where a wide opening is required but a specific overlay or reveal has been calculated around a 1.8mm spacer. Because it belongs to the hinge spacers and wedges product class, it suits work where the installer wants to solve alignment at the hinge location instead of relying on case-level adjustments.

Why The 1.8mm Height And S2XX86KT Code Matter

The defined 1.8mm height gives designers and installers a numeric dimension to plug into hinge boring and overlay calculations, helping translate drawings into predictable cabinet door behavior when Silentia hinges are specified. A known spacer thickness reduces trial-and-error adjustments, since the stand-off at the hinge cup is no longer an estimate but a fixed part of the hardware stack. The Salice America S2XX86KT manufacturer part number ties this spacer to Salice documentation and ordering systems, which matters when projects repeat the same hinge and spacer combinations across many cabinets. In the hinge spacers and wedges category, having both a precise height and an exact code streamlines reorders and service work, because matching the part number reproduces the same 1.8mm offset without recalculating or remeasuring in the field.

Common Questions About The Silentia Hinge Spacer

Selecting This Spacer For Silentia Hinge Projects

The Silentia hinge cup spacers with 1.8mm height give a defined way to adjust Salice Silentia 110 deg and 155 deg hinge layouts using a known offset at the cup. With the S2XX86KT designation and placement in the hinge spacers and wedges class, this part aligns directly with Silentia hinge specifications. For projects already based on Silentia hinges, adding this spacer to the plan lets the hinge stack match drawings and dimensions built around a 1.8mm cup spacer, supporting consistent cabinet door results across a job.