Silentia Hinge Spacers 1.8mm Height For Silentia 155 Deg Hinges

Silentia Hinge Spacers 1.8mm For Clean Hinge Fit

Silentia hinge spacers 1.8mm give a fixed 1.8mm height between the Salice America Silentia hinge cup and the mounting surface, which helps you maintain a consistent reveal when cabinet conditions call for that extra offset. Described as hinge cup spacers, they sit at the hinge cup location so the hinge position shifts by a precise 1.8mm, useful when doors or cabinet construction differ from standard layouts. The spacer is identified in the SAP description as a spacer 1.8mm for 165 degree hinges, so it is targeted to applications using 165 degree opening geometry where cup height must be adjusted. Being part of the hinge spacers and wedges product class, it is intended to fine-tune how the hinge works in the overall hardware stack so you can match hinge action to your cabinet design.

Key Spacer Details For Hinge Setup

• The spacer height is 1.8mm, which shifts the hinge cup by that amount so you can adapt to cabinet or door thickness variations where standard hinge mounting would not give the reveal you want.
• The SAP description states it is for 165 degree hinges, indicating it is sized for installations using 165 degree opening hinges where the cup position benefits from a defined 1.8mm offset.
• The web description calls it a Silentia hinge cup spacer, so it is positioned to work at the hinge cup location, helping you manage how the Silentia hinge sits in the door for smoother alignment.
• The category of hinges and hinge accessories shows it is meant to support hinge installation, so it becomes part of the hinge layout rather than a cabinet structural piece.
• Being in the hinge spacers and wedges product class signals its role as a tuning element in the hinge system, letting you handle small positional changes without altering the door or cabinet.

Hinge Spacer Mounting And Application Focus

This spacer is described as a Silentia hinge cup spacer for use with 110 degree hinges and 155 degree hinges, so it is aimed at hinge layouts using these Silentia opening angles where an added 1.8mm under the cup improves fit. The same web description also states it is for 155 degree hinges, aligning with the Silentia product name that highlights Silentia 155 degree hinges on the product line. The SAP description further identifies it as a spacer 1.8mm for 165 degree hinges, so it is also directed to hinge applications using that 165 degree specification where cup height affects how the door sweeps. Across these references, the spacer sits within the hinge system to adjust how Silentia-type hinges position on the cabinet door.

Using This Spacer In Real Cabinet Work

Where This Silentia Hinge Spacer Fits Best

The web description defines this item as a Silentia hinge cup spacer for use with 110 degree hinges and 155 degree hinges, so it fits work where those Silentia hinge openings are already planned and you need to tune the cup elevation. When cabinet design, overlay, or inset choices mean the standard hinge cup depth would place the hinge slightly off the ideal line, the 1.8mm height specified for this spacer lets you move that cup by a known amount instead of altering the bore depth. The SAP description notes it as a spacer 1.8mm for 165 degree hinges, tying it to hinge runs where 165 degree swing is required and the cup position must be adjusted by that 1.8mm step. Because the product class is hinge spacers and wedges, it is part of the hinge adjustment strategy on the door rather than a change to the cabinet carcass itself, helping keep layout changes localized to the hardware interface.

How The 1.8mm Height Supports Consistent Results

The stated 1.8mm height is a fixed measurement, so every use of this spacer moves the Silentia hinge cup by the same amount, which supports repeatable door alignment across multiple cabinets in a run. The SAP description linking it to 165 degree hinges means that when using that 165 degree opening style, the installer can rely on this specific 1.8mm change to influence how the door clears nearby parts while still following the hinge design. The web description specifying use with 110 degree hinges and 155 degree hinges shows that the same 1.8mm spacer can serve across several Silentia hinge opening ranges, allowing one spacer height to answer different Silentia hinge layouts. As a hinge cup spacer within the hinge spacers and wedges class, it functions as a fine adjustment tool in the hardware stack, translating small dimensional changes into more predictable hinge behavior and more consistent visual lines.

Common Questions About This Salice Spacer

Selecting This Spacer For Your Hinge Layout

The Silentia hinge spacers 1.8mm are defined as hinge cup spacers for use with 110 degree hinges, 155 degree hinges, and as a spacer 1.8mm for 165 degree hinges, so they suit Silentia-style layouts using these openings. With the hinge spacers and wedges classification and Salice America part number S2XF86KT, this spacer gives a repeatable 1.8mm cup shift within the hinge system. For Silentia hinge runs needing that specific offset, this spacer provides a defined way to set cup position in your cabinet hardware plan.