1.2mm Spacer for Silentia Series Hinges

1.2mm Spacer For Silentia Hinge Cup Setup

1.2mm spacer for Silentia hinges from Salice America is a hinge cup spacer designed to work with Silentia 110 degree hinges and Silentia 155 degree hinges. This spacer, identified as part S2XX86AT, establishes a fixed 1.2mm offset at the hinge cup, which influences the door position relative to the cabinet. Using a defined 1.2mm spacer in the cup area helps maintain consistent reveals on runs of doors, so multiple doors line up the same way. Because it is part of the Silentia hinge cup system, this piece fits into the workflow where the hinge cups are set into the door before hinge-to-cabinet mounting. The spacer is sold each, which lets installers match quantities to the number of hinges they plan to use on a project without overbuying. As a hinge spacer in the hinge spacers and wedges class, it supports precise cabinet hardware layout where small adjustments matter.

Key Hinge Spacer Details For Cabinet Work

• The spacer is described as a 1.2mm spacer, so it provides a defined 1.2mm offset at the hinge cup, which is useful when a small but repeatable change in door position is needed across several hinges.
• This part is specified as a Silentia hinge cup spacer, which means it is intended to sit at the hinge cup location, affecting how the Silentia hinge geometry relates to the door and cabinet face during installation.
• The spacer is stated for use with 110 degree hinges, so it supports layouts using Silentia 110 degree hinges where the installer wants matching spacing on each hinge position.
• The spacer is also stated for use with 155 degree hinges, allowing the same 1.2mm cup offset to be used when wider door opening is required with Silentia 155 degree hinges.
• The product class is hinge spacers and wedges, which places this part in the group of small alignment pieces that fine-tune hinge and door placement rather than acting as primary structural hardware.
• The item is sold each, which aligns purchasing directly with the exact hinge count on a job, useful when planning for multi-hinge doors or multiple cabinet runs.

Silentia Spacer Use In Hinge Cup Installation

The spacer is designated as a Silentia hinge cup spacer, so it integrates at the hinge cup during installation, where the hinge body mounts in the door. Because it works with Silentia 110 degree hinges and 155 degree hinges, one spacer type can support both common Silentia opening angles in a shop. The defined 1.2mm thickness sets a consistent offset at this hinge cup point, which influences how the door sits against the cabinet once the hinges are fastened. Using a spacer built for this hinge system helps keep the relationship between door drilling, hinge cup position, and cabinet mounting consistent from door to door on a project.

Using This 1.2mm Spacer In Real Projects

Where The Silentia Hinge Spacer Fits

This 1.2mm spacer for Silentia hinges serves at the cup interface of Silentia 110 degree hinges and 155 degree hinges, so it becomes part of the door-side hinge stack. Since it is described specifically as a Silentia hinge cup spacer, it is intended to occupy the space between the hinge cup and the mounting surface at that location. By defining this 1.2mm layer exactly where the hinge sits, the spacer alters the starting geometry for the hinge movement. On cabinet doors that repeat along a run, using the same 1.2mm spacer at each Silentia hinge cup location helps the installer hold the same relationship between door edge and cabinet face. In frameless cabinet layouts or closely ganged doors, that consistent hinge cup spacing can simplify drilling patterns and layout marks because one offset is used as a standard across many doors.

Why This Spacer Matters For Consistent Results

The spacer is identified by Salice America as S2XX86AT in the hinge spacers and wedges category, so it is a dedicated part intended to adjust small dimensional relationships rather than carry major loads. Its defined 1.2mm thickness lets the installer plan reveals and clearances knowing that the hinge cup sits off the mounting surface by that exact amount. Because the spacer works with both Silentia 110 degree and 155 degree hinges, the same offset principle applies whether the door is set up for standard opening or wider access. Having this fixed 1.2mm increment tied directly to the Silentia hinge cup can help when translating design drawings into boring patterns, since the installer can treat the spacer as part of the hinge stack height. Over multiple doors and cabinets, that repeatable stack height supports consistent visual alignment and reduces dimension variations from one hinge location to the next.

Common Questions About The 1.2mm Silentia Spacer

Selecting This Spacer For Silentia Hinge Layouts

The 1.2mm spacer for Silentia hinges from Salice America provides a defined 1.2mm hinge cup offset on Silentia 110 degree hinges and 155 degree hinges. For cabinet work using Silentia hardware from Wurth Baer Supply, this spacer supports consistent cup geometry door to door. Matching the part S2XX86AT to projects that rely on precise reveals lets the hinge cup spacing become a predictable part of the layout, so runs of Silentia doors follow the same dimensional setup across the job.