clip-on cam adjustable wing mounting plate from Salice America is a hinge mounting plate designed for use with Salice hinges. It works as the interface between the Salice hinge arm and the cabinet, so the hinge position can be fine-tuned on the job. The plate is compatible with all Salice hinges Series F and Series B, which lets one plate support multiple hinge series on the same project. Its 3mm mounting plate height sets the overlay geometry for the hinge, giving consistent door alignment when matching existing layouts. As a nickel-plated plate, it has a corrosion-resistant surface that holds up in normal cabinet environments. The die-cast construction provides a solid base for hinge adjustments, which helps keep doors stable after installation. This plate is identified by manufacturer part number BAV3M39F and SAP description DOMI SNAP DIE CAST MP W/EURO SCREW,3MM, helping align purchasing with shop drawings.
This Salice hinge mounting plate uses a clip-on connection with the hinge, so the hinge arm can be attached or removed without disturbing the plate position. Depth adjustment from -0.5 mm to +2.8 mm is handled through an eccentric cam, which allows incremental in-and-out movement of the door while the plate stays fixed to the cabinet. Height adjustment of plus or minus 2 mm occurs through slotted holes in the plate, which provides vertical play on the mounting surface for aligning door tops and bottoms. The standard 37 mm x 32 mm positioning gives reference dimensions for drilling patterns, helping installers set up boring machines or jigs consistently across cabinets.
This hinge mounting plate is in the hinges and hinge base plates category, so it is suited to cabinet and casework hinge mounting. Its compatibility with all Salice hinges Series F and Series B means it can be used wherever those Salice hinges are specified, such as frameless cabinet runs using consistent hinge families. The standard 37 mm x 32 mm positioning aligns with common European style cabinet drilling, which supports use in production shops running line-bored panels. The 3mm mounting plate height defines a predictable starting geometry for overlay and reveal, which is useful when matching existing hinge setups during remodels that retain Salice hardware families.
The plate provides depth adjustment from -0.5 mm to +2.8 mm via an eccentric cam, giving a controlled way to bring doors closer to or farther from the cabinet edge after the hinge is clipped on. That range helps compensate for small variations in door thickness, drilling depth, or carcass squareness without refilling or redrilling hinge positions. Height adjustment of plus or minus 2 mm through slotted holes lets the installer shift the mounted plate up or down, helping align door gaps across a bank of doors when carcasses or floors are slightly out of level. The nickel-plated, corrosion-resistant finish keeps the adjustment mechanisms more consistent in typical humid kitchen or bath conditions, which supports smoother re-adjustment later. The economical clip-on plate design also speeds hinge mounting and removal during fit-up or finishing, because the plate can stay fixed while doors are taken off and rehung.
This hinge mounting plate is compatible with all Salice hinges Series F and Series B, so those hinge arms can clip on to this plate across different cabinet runs.
This plate uses an eccentric cam to provide depth adjustment from -0.5 mm to +2.8 mm, letting the door move in or out relative to the cabinet after mounting.
The mounting plate provides height adjustment of plus or minus 2 mm through slotted holes, which supports fine-tuning door reveals vertically on the cabinet.
This hinge mounting plate uses standard 37 mm x 32 mm positioning, giving reference dimensions for setting up line boring or drilling jigs on cabinet sides.
The nickel-plated, corrosion-resistant finish helps the plate handle typical kitchen and bath humidity, supporting consistent hinge performance over its service life.
The 3mm mounting plate height sets the hinge arm position off the cabinet, which helps define overlay and maintain consistent alignment with matching Salice setups.
The Salice America clip-on cam adjustable wing mounting plate with 3mm height gives a single part that works with Series F and Series B Salice hinges while offering both depth and height adjustment. Its standard 37 mm x 32 mm positioning and nickel-plated, corrosion-resistant finish support consistent cabinet layouts using European drilling patterns. For projects built around Salice hinge families, this BAV3M39F hinge mounting plate from Wurth Baer Supply offers a defined adjustment range and known geometry that fits into repeatable cabinet production and service work.
Sold In: 300 Each